Table of Contents
Advertisement
Process DRM Request Interface
The Process DRM Request interface is slightly different from the Process Request
Interface used by Certificate Managers and Registration Managers.
Default Forms
The Process DRM Request interface is not used in any default forms. The interface
requires the sequence number of an archival request, so it is used in templates that
list requests (with their sequence numbers) to render buttons that allow an agent to
view or change the assignment of a request.
Request Parameters
The following table lists the parameters accepted by the Process DRM Request
interface.
The agent interface requires SSL client authentication, so information about the
agent can be gleaned from the certificate used to authenticate and does not need to
be passed in parameters.
Table 6-30 Parameters Accepted by the Process DRM Request Interface
Parameter
doAssign
moreComments
op
overrideAssignment
164
Netscape Certificate Management System Customization Guide • May 2002
Format and Description
yes | no
Specifies whether to assign the request to the agent using the interface. If this
parameter is no, null, or not supplied, the request will be displayed, but not
assigned to the agent.
string
Specifies additional comments to be stored with the request. Comments may be
useful for future reference or to provide data to another agent that needs to
process the request.
processReq
The only operation supported is processReq.
yes | no
Specifies whether or not to override an existing assignment. If a request is
already assigned to another agent, an agent must use doAssign = yes and
overrideAssignment = yes to assume assignment of the request. If the
request is not assigned, overrideAssignment is not required.
Advertisement
Table of Contents
