Table of Contents
Advertisement
Select for Revocation Interface
Default Forms
By default forms that use the Select for Revocation Interface are embedded as
buttons on certificate lists returned from the List Certificates Interface accessed
through an agent port (
rendered using the
Interface section.
Request Parameters
The following table lists the parameters that are used to select certificates through
the Select for Revocation Interface. This is an agent interface, so the HTTP POST or
GET request must use SSL client authentication with a valid agent certificate.
Table 6-35 Parameters Accepted by the Select For Revocation Interface
Parameter
revokeAll
templateName
totalRecordCount
164
Netscape Certificate Management System Customization Guide • March 2002
/ca/listCerts
queryCert.template
Format and Description
QUERY_FILTER
For information on constructing a query filter, see Table 3-17 in the End-Entity
Interfaces "List Certificates Interface" section.
To ensure accuracy when revoking certificates, you should use a query filter
that selects each certificate by its serial number.
An example value for revokeAll to revoke certificates with serial numbers 10
and 14 is:
(|(certRecordId=10)(certRecordId=14))
string
Filename relative to the template directory (web-apps/ee/ca,
web-apps/ee/ra, web-apps/agent/ca, web-apps/agent/kra, or
web-apps/agent/ra) of a file to use as the response template. This template
will be used for any response, overriding default template settings.
number
The total number of certificates to select for revocation. This value is simply
passed through and shows up in the response template as
result.header.totalRecordCount.
or
). These response are
/ra/listCerts
discussed in the List Certificates
Advertisement
Table of Contents
