Netscape MANAGEMENT SYSTEM 6.0 - CUSTOMIZATION Manual page 103

Parameters Accepted by the Approve Revocation Interface (Continued)
Table 6-2
Parameter
revocationReason
revokeAll
serialNumber
templateName
templateType
Format and Description
0 - 6
The code for the reason the certificates are being revoked. The
revocation codes are:
• 0 - Reason not specified
• 1 - Key compromised
• 2 - CA key compromised
• 3 - Affiliation changes
• 4 - Certificate superseded
• 5 - Cessation of operation
• 6 - Certificate is on hold
QUERY_FILTER
For information on constructing a query filter, see Table 3-17 in the
section for "List Certificates Interface" on page 72.
To ensure accuracy when revoking certificates, you should use a query
filter that selects each certificate by its serial number.
An example value for revokeAll to revoke certificates with serial
numbers 10 and 14 is:
(|(certRecordId=10)(certRecordId=14))
number
Specifies the serial number of a certificate to revoke.
string
Filename relative to the template directory (web-apps/ee/ca,
web-apps/ee/ra, web-apps/agent/ca, web-apps/agent/kra,
or web-apps/agent/ra) of a file to use as the response template. This
template will be used for any response, overriding default template
settings.
string
The name of the template to use for the response. The
reasonToRevoke.template file sets this to RevocationSuccess.
Approve Revocation Interface
Chapter 6 Agent Interface Reference 103