Single-Server Configuration; All Platforms - Netscape ENTREPRISE SERVER 6.1 - 08-2002 ADMINISTRATOR Administrator's Manual

Enterprise Server Configuration
To access the dynamic reconfiguration screen and install a new configuration
dynamically, click the Apply link found in the upper right corner of the Server
Manager, Class Manager, and Virtual Server Manager pages, then click the Load
Configuration Files button on the Apply Changes page. If there are errors in
installing the new configuration, the previous configuration is restored.

Single-Server Configuration

If you have installed Enterprise Server on a single server machine, the installation
process places all the files under the server root directory that you specified during
installation.

All Platforms

For all platforms, the following directories are created under the server root
directory:
• alias contains the key and certificate files for all Netscape servers (for example,
https-admserv-
• bin contains the binary files for the server, such as the actual server, the
Administration Server forms, and so on. In addition, this directory includes the
https/install
and default configuration files needed for backward compatibility.
• docs is the server's default primary document directory, where your server's
content files are usually kept. If you are migrating settings from an existing
server, this directory doesn't appear until you finish the migration process.
• extras contains the log analyzer and log analysis tools.
• httpacl contains the files that store access control configuration information in
the
generated.
Manager access control forms after saving your changes;
genwork.
• https-admserv contains the directories for the Administration Server. This
directory has the following subdirectories and files:
32 Netscape Enterprise Server Administrator's Guide • August 2002
server_id-cert7.db and
folder that contains files needed for migrating server settings
The directory contains a command-line log analyzer. This log
flexanlg
analyzer analyzes files in flexlog format.
The directory contains the log analysis tool that runs through the
log_anly
Server Manager. This log analyzer analyzes files in common log format
only.
server-id
generated. .acl
server-id
.acl
server-id contains your changes before you save your changes.
.acl
secmod.db
and server-id
genwork.
contains changes you make using the Server
).
files. The file
.acl