Accessing Stdout() And Stderr() Messages (Unix/Linux) - Netscape ENTREPRISE SERVER 6.1 - 08-2002 ADMINISTRATOR Administrator's Manual

Starting and Stopping the Server
The status of the server appears in the Server On/Off page. You can start and stop
the server using one of the following methods:
• Click the Server On or Server Off in the Server On/Off.
• Use the Services window in the Control Panel (Windows NT/Windows 2000).
• Use
command
-i
• Use
is restarted. If you set the
"
etc/inittab
automatically restarts. (UNIX/Linux)
After you shut down the server, it may take a few seconds for the server to
complete its shut-down process and for the status to change to "Off."
If your machine crashes or is taken offline, the server stops and any requests it was
servicing may be lost.
NOTE
Accessing stdout() and stderr() Messages
(UNIX/Linux)
In versions of Enterprise Server prior to 6.0, users started Enterprise Server without
the UNIX Watchdog process (
(
stdout()
In version 6.0 and above, however, if
Server initialization, Enterprise Server will not have adequate permission to
acquire its listen socket and initialization will fail.
150 Netscape Enterprise Server Administrator's Guide • August 2002
If you want to use this script with
start.
http:2:respawn:server_root/type-identifier/start -start
in . (UNIX/Linux)
/etc/inittab
, which shuts down the server completely, interrupting service until it
stop
"), you must remove the line pertaining to the web server in
respawn
before shutting down the server; otherwise, the server
• If you have a security module installed with your server, you will be
required to enter the appropriate passwords before starting or stopping
the server.
• On UNIX, some Enterprise Server installations may require access to
more memory and/or file descriptors than your operating system
allows by default. If you are unable to start the server, check the
resource limits imposed by your operating system using the ulimit
command. Your operating system's ulimit man page should provide
more information.
) and standard error (
init
file to automatically restart (using
etc/inittab
) in order to gain access to standard out
uxwdog
) messages.
stderr()
is not running during Enterprise
uxwdog
, you must include the start