Netscape ENTREPRISE SERVER 6.1 - 08-2002 ADMINISTRATOR Administrator's Manual page 263

Create a new listen socket that runs a port separate from the port that the
1.
Administration Server uses.
For example, if your Administration Server runs on port 8888, this new listen
socket must have a different port number. Using a different listen socket helps
safeguard your Administration Server.
For security reasons, you cannot add this listen socket through the user
interface. Instead, you add it in the Administration Server's
Open the administration server's
2.
server_root
Add a new listen socket and connection group to the file.
3.
The IP address should be
port different from the Administration Server's port. The default virtual server
should be useradmin.
Code Example 11-1
<LS id="ls2" ip="0.0.0.0" port="8889" security="off" acceptorthreads="1"
blocking="no">
<CONNECTIONGROUP id="group2" matchingip="default" servername="example.com"
defaultvs="useradmin"/>
</LS>
In this example,
group2
Edit the
4.
class userclass) uses the connection group you created.
Set the state for the useradmin virtual server to
5.
/https-admserv/config/server.xml
New listen socket
is the listen socket created with a connection group of
ls2
.
file so that the useradmin virtual server (found in the
server.xml
Allowing Users to Monitor Individual Virtual Servers
file, found at
server.xml
or , and the port number should be a
0.0.0.0 ANY
server.xml
.
.
on
Chapter 11 Using Virtual Servers
file.
263