Table of Contents
Advertisement
Adding a Server to a Cluster
Administer a remote server by accessing its Server Manager forms from the
4.
cluster form or by copying a configuration file from one server in the cluster to
another.
NOTE
Adding a Server to a Cluster
When you add a server to a cluster, you specify its Administration Server and port
number. If that Administration Server contains information about more than one
server, all of its servers are added to the cluster. You can remove individual servers
later.
NOTE
To add a remote server to a cluster, perform the following steps:
Make sure the master Administration Server is tuned on.
1.
Access the Administration Server and choose the Cluster Mgmt tab.
2.
Click the Add Server link.
3.
Choose the protocol that the remote Administration Server uses.
4.
Enter the fully qualified domain name as it appears in the
5.
the remote server in the Admin Server Hostname field.
For example:
Enter the port number for the remote Administration Server.
6.
Click OK.
7.
142
Netscape Enterprise Server Administrator's Guide • August 2002
After changing the configuration for a remote server, restart the
remote server.
If a remote Administration Server contains information about a
cluster, the servers in the remote cluster are not added. The master
Administration Server adds only those servers that are physically
installed on the remote computer.
for a normal Administration Server
http
for a secure Administration Server
https
mktg.example.com
file of
magnus.conf
Advertisement
Table of Contents
