TFA DESIGN Instruction Manual

Instruction Manual
Kat. Nr. 60.3008
Kat. Nr. 60.3009
Kat. Nr. 60.3010
Kat. Nr. 60.3023
DESIGN – Wall clock
Thank you for choosing this instrument from TFA.
1. Before you start using it
• Please make sure to read the instruction manual carefully.
• Following and respecting the instructions in your manual will pre-
vent damage to your instrument and loss of your statutory rights
arising from defects due to incorrect use.
• We shall not be liable for any damage occurring as a result of not
following these instructions.
• Please take particular note of the safety advice!
• Please keep this instruction manual for future reference.
2. For your safety
• This product should only be used as described within these instruc-
tions.
• Unauthorised repairs, modifications or changes to the product are
prohibited.
• This product is not be used for medical purpose or for public infor-
mation, it is only intended for home use.
Caution!
Risk of injury:
• Keep this instrument and the battery out of the reach of children.
• Batteries must not be thrown into a fire, short-circuited, taken
apart or recharged. Risk of explosion!
• Batteries contain harmful acids. Low batteries should be changed as
soon as possible to prevent damage caused by leaking.
• Wear chemical-resistant protective gloves and glasses when han-
dling leaking batteries.
Important information on product safety!
• Do not place your product near extreme temperatures, vibrations or
shocks.
• Protect it from moisture.
3. Getting started
• Insert the battery (1x 1.5 V AA), polarity as illustrated. The unit is
now ready to use.
3.1 Setting of the clock
• Set the actual time by turning the setting button at the backside.
4. Care and maintenance
• Clean your instrument with a soft damp cloth. Do not use solvents
or scouring agents
• Remove the battery if you do not use it for a long period of time
• Keep the instrument in a dry place.
5. Troubleshooting
Problem
No hand movement
Incorrect display
If your device fails to work despite these measures contact the supplier
from whom you purchased it.
Solution
➜ Ensure battery polarity is correct
➜ Change the battery
➜ Change the battery