Beurer OT 20 Intended Use
Hide thumbs Also See for OT 20:

Advertisement

Intended use
The basal thermometer is a special digital thermometer
designed to measure the basal temperature in women of
childbearing age. The maximum temperature measured
with the sensor is saved until the next measurement.
Transferring the measurements to the Ovy app enables fer-
tile and non-fertile days in the cycle to be predicted, as well
as periods. The thermometer is not a contraceptive.
Signs and symbols
The following symbols are used in these instructions for
use, on the packaging and on the type plate for the device
and the accessories:
Attention
Observe the instructions for use
Application part, type BF
Disposal in accordance with the Waste
Electrical and Electronic Equipment EC
Directive – WEEE
Dispose of packaging in an environ-
21
mentally friendly manner.
PAP
Manufacturer
Protected against foreign objects equal
IP 27
to or greater than 12.5 mm and against
temporary immersion in water
Batch designation
LOT
Permissible storage and transport tem-
Storage/Transport
perature and humidity
Permissible operating temperature and
Operating
humidity
The CE labelling certifies that the
product complies with the essential
requirements of Directive 93/42/EEC on
medical devices.
OT 20
ENGLISH
Included in delivery
• Basal thermometer • Instructions for use
• 1 x 1.5 V LR 41 battery • 1 x Protective cover
Important safety notes – retain for future
reference.
To make optimum use of all the benefits of the thermom-
eter, read the instructions for use carefully before initial
use, retain them for future use and make them available to
other users.
• The thermometer is intended for the measurement of
human body temperature only.
• The thermometer is only designed for the measuring area
on the human body stated in the instructions for use.
• Do not leave children unattended with the device.
• Check the thermometer for signs of damage or wear
before each use. If the thermometer is damaged or worn,
it must no longer be used.
• The minimum duration of measurement until the acoustic
signal must always be observed. Discuss the measured
values with your doctor.
• The thermometer contains delicate electronic compo-
nents. It should therefore be protected against impacts,
bending, high temperatures and direct sunlight.
• This thermometer features a flexible measuring tip and
therefore provides more comfort and safety during meas-
urement, in particular for people with a reduced level of
consciousness. Do not bend the tip more than 90°.
• Operation in the vicinity of strong electromagnetic fields,
for example next to a mobile phone, may cause mal-
functions.
• The thermometer conducts a self-test when you switch it
on. There is no need to check the
measurement accuracy.
• Influencing factors such as alcohol consumption and
unusual body signals such as fever, disrupted sleep, your
mood or out-of-the-ordinary physical activity may also
distort your basal temperature and make it unusable for
evaluation.
• If you obtain unusual temperature results, please contact
your doctor straight away.
• This device meets the requirements of the EU Directive
93/42/EEC concerning medical devices, as well as those
of the Medizinproduktegesetz (German Medical Devices
Act), the European Standard EN 12470-3: Clinical ther-
Hans Dinslage GmbH, Riedlinger Straße 28,
88524 Uttenweiler, GERMANY

Advertisement

Table of Contents
loading
Need help?

Need help?

Do you have a question about the OT 20 and is the answer not in the manual?

Questions and answers

Summary of Contents for Beurer OT 20

  • Page 1 Hans Dinslage GmbH, Riedlinger Straße 28, OT 20 88524 Uttenweiler, GERMANY ENGLISH Intended use Included in delivery The basal thermometer is a special digital thermometer • Basal thermometer • Instructions for use designed to measure the basal temperature in women of •...
  • Page 2 mometers – Part 3: Performance of compact electrical thermometers (non-predictive and predictive) with max- imum device and the European Standard EN 60601-1-2 (In accordance with CISPR 11, IEC 61000-4-2, IEC 61000-4-3 and IEC 61000-4-8), and is subject to particular precautions with regard to electromagnetic compatibility.
  • Page 3 If you change the thermometer during the cycle, you must also note it as a disruption, just like a change to the place of measurement. For this cycle, a reliable evaluation is then no longer guaranteed. Press the On/Off button to switch on the device.
  • Page 4: Replacing The Battery

    Replacing the battery 1. Replace the battery when the battery status indicator appears on the display: 2. Slide back the battery compartment cover to remove it. 3. Pull the battery holder carefully out of the housing by approx. 1 cm. 4. Use a non-metallic object to push the battery out of its holder.
  • Page 5: Storage And Disposal

    The measured temperature is above 42.99°C and is therefo- re outside the measurement range. Electronic fault in the device. If this occurs repeatedly, please contact the Beurer GmbH customer service team. Technical data Type OT20 Measurement 32.00 °C - 42.99 °C...
  • Page 6 Display Liquid crystal display (LCD) with 5 digits Storage and Temperature -20 °C - +55 °C transportation Rel. humidity 15 % - 95 % conditions 700 - 1060 hPa ambient pressure Operating Temperature 5 °C - +40 °C conditions Rel. humidity 15 % - 95 % 700 - 1060 hPa ambient pressure Battery Button cell type LR41 1.5 V...
  • Page 7: Warranty & Service

    In case of returning the unit please add a copy of your receipt and a short report of the defect. The following warranty terms shall apply: 1. The warranty period for BEURER products is either 5 years or- if longer- the country specific warranty period from date of Purchase.

Table of Contents