Chapter 5 Post Installation; Launching The Help System - Netscape DIRECTORY SERVER 7.0 Installation Manual

Hide thumbs Also See for NETSCAPE DIRECTORY SERVER 7.0:
Table of Contents

Advertisement

This chapter describes the post-installation procedures for launching the online
help and populating the directory tree.
This chapter has the following sections:
Launching the Help System (page 69)
Populating the Directory Tree (page 70)

Launching the Help System

The help system for Directory Server is dependent upon Netscape Administration
Server. If you are running Directory Server Console on a machine remote to
Administration Server, you will need to confirm authorizations on Administration
Server.
Client IP address authorized on Administration Server. The machine running
Directory Server Console needs access to Administration Server. Configure
Administration Server to accept the client machine's IP address in Administration
Server:
Launch Administration Server Console. The console should be running on the
1.
same machine as Administration Server.
Click the Configuration tab, then click the Network tab.
2.
In the Connection Restrictions Settings, select "IP Addresses to Allow" from
3.
the pull down menu. Click Edit.
Edit the IP Addresses field to the following: *.*.*.*
4.
This allows all clients access to Administration Server.
Chapter 5
Post Installation
69

Advertisement

Table of Contents
loading

Table of Contents