Using Typical Installation On Windows - Netscape DIRECTORY SERVER 7.0 Installation Manual

For the user you want to run Administration Server as, enter
29.
default.
For information on why you should run Administration Server as
"Deciding the User and Group for Your Netscape Servers (UNIX only)," on
page 14.
The server is then unpackaged, minimally configured, and started. You are told on
what host and port number Administration Server is listening.
The server is configured to use the following suffixes:
• The suffix that you configured.
•
o=NetscapeRoot
Do not modify the contents of the directory under the
Either create data under the first suffix or create a new suffix to be used for this
purpose. For details on how to create new suffixes for your Directory Server, see
the Netscape Directory Server Administrator's Guide.

Using Typical Installation on Windows

To perform a typical installation on Windows:
Log in as a user with administrator privileges.
1.
If you have not already done so, download the product binaries file to the
2.
installation directory.
Unzip the product binaries files, and run the
3.
When you are asked what you would like to install, select the default, Netscape
4.
Servers.
When you are asked what type of installation you would like to perform, select
5.
the default, Typical.
For server installation root, enter a full path to the location where you want to
6.
install your server.
The location that you enter must be some directory other than the directory
from which you are running setup. If the directory that you specify does not
exist, the program creates it for you.
setup
o=NetscapeRoot
program.
setup
Chapter 3 Using Express and Typical Installation
Using Typical Installation
. This is the
root
, see
root
suffix.
49