Using Typical Installation; Using Typical Installation On Unix - Netscape DIRECTORY SERVER 7.0 Installation Manual

Using Typical Installation

Most first time installations of Directory Server can be performed using the Typical
Installation option of the
depending on whether you are installing on UNIX or Windows. The following
sections outline the different procedures.

Using Typical Installation on UNIX

To perform a typical installation on UNIX:
Log in as
1.
Create a new directory:
2.
If you have not already done so, download the product binaries file to the
3.
installation directory.
Unpack the product binaries file using the following command:
4.
where
Run the
5.
binary files. Issue the following command from the installation directory:
The
6.
Enter to respond with the default (the default for this prompt is Yes) or press
if you would like to exit the
If you want to log in as
program.
o=NetscapeRoot
Do not modify the contents of the directory under the
suffix. Either create data under the first suffix or create a new suffix to be
used for this purpose. For details on how to create new suffixes for your
Directory Server, see the Netscape Directory Server Administrator's Guide.
setup
.
root
# mkdir ds
# cd ds
# gunzip -dc filename.tar.gz | tar -xvof -
corresponds to the product binaries that you want to unpack.
filename
program. You can find it in the directory where you untarred
setup
./setup
program asks if you would like to proceed with the setup. Press
setup
root
program. Typical installation differs slightly
program.
setup
or superuser ( ), you will need to exit the
su
Chapter 3 Using Express and Typical Installation
Using Typical Installation
o=NetscapeRoot
n
setup
45