Netscape DIRECTORY SERVER 7.0 Installation Manual page 62

Using Silent Installation
Table 4-2
Required Directive
Components
ServerPort
ServerIdentifier
Suffix
RootDN
RootDNPwd
Optional Directive
AddSampleEntries
62 Netscape Directory Server Installation Guide • October 2004
Required and Optional [slapd] Installation Directives
Description
Specifies the slapd components to be installed. The
components are:
• slapd — Install Directory Server.
• slapd-client — Install Directory Server Console.
This directive is required. It is recommended that you
always install both components any time you install
the Directory Server.
Specifies the port the server will use for LDAP
connections. For information on selecting server port
numbers, see "Choosing Unique Port Numbers‚" on
page 13. This directive is required.
Specifies the server identifier. This directive is required.
This value is used as part of the name of the directory in
which the Directory Server instance is installed. For
example, if your machine's host name is phonebook,
then this name is the default and selecting it will cause
the Directory Server instance to be installed into a
directory labeled slapd-phonebook.
Specifies the suffix under which you will store your
directory data. For information on suffixes, see
"Determining Your Directory Suffix‚" on page 16. This
directive is required.
Specifies the distinguished name used by the directory
manager. For information on the directory manager,
see "Defining Authentication Entities‚" on page 15. This
directive is required.
Specifies the directory manager's password. This
directive is required.
Description
If set to yes, this directive causes the example.ldif
sample directory to be loaded. Use this directive if you
are installing the Directory Server for evaluation
purposes and you do not already have an LDIF file to
populate your directory with. Default is no.