[Nsperl] Installation Directives; [Perldap] Installation Directives; Using Silent Instance Creation - Netscape DIRECTORY SERVER 7.0 Installation Manual

[nsperl] Installation Directives

There is only one [
whether nsPerl is to be installed. Table 4-5 lists the directive.
Table 4-5
Directive
Components

[perldap] Installation Directives

There is only one [
whether PerLDAP is to be installed. Table 4-6 lists the directive.
Table 4-6
Directive
Components

Using Silent Instance Creation

If you have Directory Server installed in a server root, you can create additional
instances of Directory Server under the same server root without having to run the
setup
Netscape Console or from the command-line.
] installation directive and it allows you to determine
nsperl
[ ] Installation Directive
nsperl
] installation directive, and it allows you to determine
perldap
[ ] Installation Directive
perldap
program. You can create additional instances of the server either by using
Description
Specifies whether nsperl that is bundled with Directory
Server is to be installed. This nsPerl is CPAN perl, built
and maintained for use by Netscape server products.
• nsperl561 — Install nsPerl version 5.6.1.
This directive is required if you are installing a Netscape
server (versus just Netscape Console).
Description
Specifies whether perldap that is bundled with
Directory Server is to be installed. This is mozilla.org
PerLDAP, built and maintained at Netscape and used by
Netscape server products.
• perldap14 — Install perLDAP version 1.4.1.
This directive is required if you are installing a Netscape
server (versus, for example, just Netscape Console).
Chapter 4
Using Silent Instance Creation
Silent Installation and Instance Creation 65