Configuring Snmp For The Directory Server - Netscape DIRECTORY SERVER 6.1 - ADMINISTRATOR Administrator's Manual

Select SNMP from the Service list.
2.
Click Start to start the SNMP Service, click Stop to stop the SNMP Service, or
3.
click Stop then Start to restart the SNMP Service.
Stopping the directory does not stop the directory subagent. If you want to
stop the subagent, you must do so from the Control Panel.
NOTE

Configuring SNMP for the Directory Server

To configure SNMP settings from the Directory Server Console:
Make sure the Directory Server is running.
1.
On the Directory Server Console, select the Configuration tab and then select
2.
the topmost entry in the navigation tree in the left pane.
Select the SNMP tab in the right pane.
3.
Select the "Enable Statistics Collection" checkbox to enable Directory Server
4.
statistics collection. Clear the checkbox to disable it.
For UNIX servers, enter the hostname on which the master agent resides and
5.
the port number used to communicate with the master agent in the Master
Host and Master Port text boxes.
NOTE
The defaults are
Enter a description that uniquely describes the directory instance in the
6.
Description text box.
Type the name the company or organization to which the directory belongs in
7.
the Organization text box.
Type the location within the company or organization where the directory
8.
resides in the Location text box.
Type the email address of the person responsible for maintaining the directory
9.
in the Contact text box.
If you add another server instance and you want the instance to be
part of the SNMP network, you must restart the subagent.
The hostname and port number are required.
and
localhost
Configuring SNMP for the Directory Server
respectively.
199
Chapter 13 Monitoring Directory Server Using SNMP 429