Editing An Aci - Netscape DIRECTORY SERVER 6.1 - ADMINISTRATOR Administrator's Manual

Click the Hosts tab, then the Add button to display the Add Host Filter dialog
6.
box.
You can specify a hostname or an IP address. If you specify an IP address, you
can use the wildcard character (*).
Click the Times tab to display the table showing at what times access is
7.
allowed.
By default, access is allowed at all times. You can change the access times by
clicking and dragging the cursor over the table. You cannot select discrete
blocks of time.
When you have finished editing the ACI, click OK.
8.
The ACI Editor is dismissed and the new ACI is listed in the ACI Manager
window.
NOTE At any time during the creation of the ACI, you can click the Edit
Manually button to display the LDIF statement that corresponds to
your input. You can modify this statement, but your changes will
not necessarily be visible in the graphical interface.

Editing an ACI

To edit an ACI:
On the Directory tab, right-click the top entry in the subtree, and choose Set
1.
Access Permissions from the pop-up menu.
The Access Control Manager window is displayed. It contains the list of ACIs
belonging to the entry.
In the Access Control Manager window, highlight the ACI that you want to
2.
edit, and click Edit.
The Access Control Editor is displayed. For details on the information you can
edit using this dialog box, refer to the online help.
Make the changes you want under the various tabs of the Access Control
3.
Editor.
When you have finished editing the ACI, click OK.
4.
The ACI Editor is dismissed, and the modified ACI is listed in the ACI
Manager.
Creating ACIs From the Console
Chapter 6 Managing Access Control 233