Initializing The Replicas For Cascading Replication; Making A Replica Updatable - Netscape DIRECTORY SERVER 6.1 - ADMINISTRATOR Administrator's Manual

e.
f.
Initializing the Replicas for Cascading
Replication
In the case of cascading replication, you should initialize replicas in the following
order:
Use the supplier server to initialize the replica on the hub supplier.
1.
From the hub supplier, initialize the replica on the consumer.
2.
For information on initializing replicas, refer to "Initializing Consumers," on page
313.

Making a Replica Updatable

To make a read-only server writable, follow this procedure:
Make sure there are no updates in progress.
1.
Stop the master server.
2.
Open the Directory Server Console for the read-only replica.
3.
Enable change log.
4.
Go to Replication, select Replication Settings for the suffix, change Replica Role
5.
to Single Master, and assign a unique replica ID.
Restart the server.
6.
In the Common Settings section specify a purge delay in the Purge delay
field.
This option indicates how often the state information stored in the
replicated entries is purged.
Click Save to save the replication settings for the database.
Making a Replica Updatable
Chapter 8 Managing Replication 311