Netscape DIRECTORY SERVER 6.1 - ADMINISTRATOR Administrator's Manual page 249

On the Users/Groups tab, in the ACI name field, type "Billing Info Read". In
3.
the list of users granted access permission, do the following:
Select and remove All Users, then click Add.
a.
The Add Users and Groups dialog box is displayed.
Set the Search area in the Add Users and Groups dialog box to to Special
b.
Rights, and select Self from the Search results list.
Click the Add button to list Self in the list of users who are granted access
c.
permission.
Click OK to dismiss the Add Users and Groups dialog box.
d.
On the Rights tab, tick the checkboxes for search and read rights. Make sure the
4.
other checkboxes are clear.
On the Targets tab, click This Entry to display the
5.
dc=example,dc=com
table, tick the checkboxes for the
attributes.
All other checkboxes should be clear. This task is made easier if you click the
Check None button to clear the checkoxes for all attributes in the table, then
clikc the Name header to organize them alphabetically, and select the
appropriate ones.
This example assumes that you have added the the
accountBalance
Click OK.
6.
The new ACI is added to the ones listed in the Access Control Manager
window.
ACI "Billing Info Deny"
In LDIF, to deny subscribers permission to modify billing information in their own
entry, you would write the following statement:
aci: (targetattr="connectionTime || accountBalance") (version 3.0;
acl "Billing Info Deny"; deny (write) userdn= "ldap:///self";)
This example assumes that the relevant attributes have been created in the schema,
and that the ACI is added to the
suffix in the target directory entry field. In the attribute
connectionTime
attributes to the schema.
ou=subscribers,dc=example,dc=com
Access Control Usage Examples
ou=subscribers,
and
accountBalance
connectionTime
Chapter 6 Managing Access Control
and
entry.
249