Network Configuration - Red Hat LINUX 7.2 - OFFICIAL LINUX CUSTOMIZATION GUIDE Manual

54 Chapter 2:Kickstart Configurator

2.5 Network Configuration

Figure 2–6 Network Configuration
There are three network configuration options: , , and . If there is not an ethernet
DHCP Static IP None
card in the system, choose .
None
Networking is only required if you choose a networking-type installation method (NFS or FTP). If you
are unsure which to choose, choose . Networking can always be configured after installation with
None
Network Configurator (redhat-config-network).
If you select , you must provide additional networking information in the table below the
Static IP
network types.