Adding A Novell Netware (Ncp) Printer - Red Hat LINUX 7.2 - OFFICIAL LINUX CUSTOMIZATION GUIDE Manual

Section 21.4:Adding a Novell NetWare (NCP) Printer

21.4 Adding a Novell NetWare (NCP) Printer

To add a Novell NetWare (NCP) printer, click the
window shown in Figure 21–1, printconf will appear. Click
You will see the screen shown in Figure 21–9, Adding an NCP Printer. Enter a unique name for the
printer in the
Queue Name
letter a through z or A through Z. The valid characters are a through z, A through Z, 0 through 9, -,
and _.
Select
Novell Printer
Figure 21–9 Adding an NCP Printer
Text fields for the following options appear below the
Choosing the Print Server:
• Server — The hostname or IP address of the NCP system to which the printer is attached.
• — The remote queue for the printer on the NCP system.
Queue
• — The name of the user you must log in as to access the printer.
User
• — The password for the user specified in the
Password
text field. The printer name cannot contain spaces and must begin with a
from the
Queue Type
button in the main printconf window. The
New
to proceed.
Next
menu, and click .
Next
Queue Type
User
menu as shown in Figure 21–10,
field above.
215