Chapter 4. Installing on Intel® and AMD Systems
Figure 4.9. Keyboard Configuration
Note
To change your keyboard layout type after you have completed the installation, use the
Keyboard Configuration Tool.
Type the system-config-keyboard command in a shell prompt to launch the
Keyboard Configuration Tool. If you are not root, it prompts you for the root password to
continue.
4.15. Enter the Installation Number
Enter your Installation Number (refer to
the package selection set that is available to the installer. If you choose to skip entering the installation
number you will be presented with a basic selection of packages to install later on.
32
Figure 4.10, "Installation
Number"). This number will determine