Red Hat ENTREPRISE LINUX 5 Installation Manual page 54

Chapter 4. Installing on Intel® and AMD Systems
Figure 4.13. Enable network Interface
Fill in the details for the iSCSI target IP and provide a unique iSCSI initiator name to identify
this system. If the iSCSI target uses Challenge Handshake Authentication Protocol (CHAP) for
authentication, enter the CHAP username and password. If your enviroment uses 2-way CHAP (also
called "Mutual CHAP"), also enter the reverse CHAP username and password. Click the Add target
button to attempt connection to the ISCSI target using this information.
Figure 4.14. Configure ISCSI Parameters
36