Red Hat ENTREPRISE LINUX 5 Installation Manual page 346

Chapter 31. Kickstart Installations
mediacheck
Activates loader code to give user option of testing integrity of install source (if an ISO-based
method).
method=cdrom
Do a CDROM based installation.
method=ftp://<path>
Use <path> for an FTP installation.
method=hd:<dev>:<path>
Use <path> on <dev> for a hard drive installation.
method=http://<path>
Use <path> for an HTTP installation.
method=nfs:<path>
Use <path> for an NFS installation.
netmask=<nm>
Netmask to use for a network installation.
nofallback
If GUI fails exit.
nofb
Do not load the VGA16 framebuffer required for doing text-mode installation in some languages.
nofirewire
Do not load support for firewire devices.
noipv6
Disable IPv6 networking during installation.
This option is not available during PXE installations
During installations from a PXE server, IPv6 networking might become active before
anaconda processes the Kickstart file. If so, this option will have no effect during
installation.
nomount
Don't automatically mount any installed Linux partitions in rescue mode.
nonet
Do not auto-probe network devices.
noparport
Do not attempt to load support for parallel ports.
nopass
Don't pass keyboard/mouse info to stage 2 installer, good for testing keyboard and mouse config
screens in stage2 installer during network installs.
328