Adding A Cluster Service To The Cluster - Red Hat CLUSTER SUITE FOR ENTERPRISE LINUX 5.1 Configuration Manual

Chapter 5. Configuring Red Hat Cluster With
addresses (with wild-card support), and netgroups.
Read-Write and Read Only options — Specify the type of access rights for this NFS client
resource:
• Read-Write — Specifies that the NFS client has read-write access. The default setting is
Read-Write.
• Read Only — Specifies that the NFS client has read-only access.
Options — Additional client access rights. For more information, refer to the exports(5) man
page, General Options
NFS Export
Name — Enter a name for the NFS export resource.
Script
Name — Enter a name for the custom user script.
File (with path) — Enter the path where this custom script is located (for example,
/etc/init.d/userscript
Samba Service
Name — Enter a name for the Samba server.
Workgroup — Enter the Windows workgroup name or Windows NT domain of the Samba
service.
Note
When creating or editing a cluster service, connect a Samba-service resource
directly to the service, not to a resource within a service. That is, at the Service
Management dialog box, use either Create a new resource for this service or
Add a Shared Resource to this service; do not use Attach a new Private
Resource to the Selection or Attach a Shared Resource to the selection.
3. When finished, click OK.
4. Choose File => Save to save the change to the
file.

8. Adding a Cluster Service to the Cluster

To add a cluster service to the cluster, follow these steps:
1. At the left frame, click Services.
74
system-config-cluster
)
/etc/cluster/cluster.conf
configuration