Starting Luci And Ricci - Red Hat CLUSTER SUITE FOR ENTERPRISE LINUX 5.1 Configuration Manual

Chapter 3. Configuring Red Hat Cluster With Conga

2. Starting luci and ricci

To administer Red Hat Clusters with Conga, install and run luci and ricci as follows:
1. At each node to be administered by Conga, install the ricci agent. For example:
# yum install ricci
2. At each node to be administered by Conga, start ricci. For example:
# service ricci start
Starting ricci:
3. Select a computer to host luci and install the luci software on that computer. For example:
# yum install luci
Note
Typically, a computer in a server cage or a data center hosts luci; however, a
cluster computer can host luci.
4. At the computer running luci, initialize the luci server using the
For example:
# luci_admin init
Initializing the Luci server
Creating the 'admin' user
Enter password:
Confirm password: <Re-type password and press ENTER.>
Please wait...
The admin password has been successfully set.
Generating SSL certificates...
Luci server has been successfully initialized
Restart the Luci server for changes to take effect
eg. service luci restart
28
<Type password and press ENTER.>
[ OK ]
command.
luci_admin init