Chapter 5.
Configuring Red Hat Cluster With
system-config-cluster
This chapter describes how to configure Red Hat Cluster software using
system-config-cluster
•
Section 1, "Configuration Tasks"
•
Section 2, "Starting the Cluster Configuration Tool"
•
Section 3, "Configuring Cluster Properties"
•
Section 4, "Configuring Fence Devices"
•
Section 5, "Adding and Deleting Members"
•
Section 6, "Configuring a Failover Domain"
•
Section 7, "Adding Cluster Resources"
•
Section 8, "Adding a Cluster Service to the Cluster"
•
Section 9, "Propagating The Configuration File: New Cluster"
•
Section 10, "Starting the Cluster Software"
Tip
While
system-config-cluster
and managing a Red Hat Cluster, the newer, more comprehensive tool, Conga,
provides more convenience and flexibility than
may want to consider using Conga instead (refer to
Hat Cluster With Conga
1. Configuration Tasks
Configuring Red Hat Cluster software with
steps:
1. Starting the Cluster Configuration Tool,
"Starting the Cluster Configuration
2. Configuring cluster properties. Refer to
, and consists of the following sections:
provides several convenient tools for configuring
and
Chapter 4, Managing Red Hat Cluster With
system-config-cluster
system-config-cluster
Tool".
Section 3, "Configuring Cluster
system-config-cluster
Chapter 3, Configuring Red
consists of the following
. Refer to
Section 2,
Properties".
. You
Conga).
53