Smart Card Error Codes - Red Hat CERTIFICATE SYSTEM 8.0 - ADMINISTRATION Admin Manual

2. Select the Status tab.
3. Under Logs, select the log to view.
4. Set the viewing preferences in the Display Options section.
• Entries — The maximum number of entries to be displayed. When this limit is reached, the
Certificate System returns any entries that match the search request. Zero (0) means no
messages are returned. If the field is blank, the server returns every matching entry, regardless
of the number found.
• Source — Select the Certificate System component or service for which log messages are to
be displayed. Choosing All means messages logged by all components that log to this file are
displayed. For more information, see
• Level — Select a message category that represents the log level for filtering messages. For
more information on log levels, see
• Filename — Select the log file to view. Choose Current to view the currently active system log
file.
5. Click Refresh.
The table displays the system log entries. The entries are in reverse chronological order, with the
most current entry placed at the top. Use the scroll arrows on the right edge of the panel to scroll
through the log entries.
Each entry has the following information shown:
• Source — The component or resource that logged the message.
• Level — The severity of the corresponding entry; see
Corresponding Log Messages"
• Date — The date on which the entry was logged.
• Time — The time at which the entry was logged.
• Details — A brief description of the log.
6. To view a full entry, double-click it, or select the entry, and click View.

15.7. Smart Card Error Codes

Smart cards can report certain error codes to the TPS; these are recorded in the TPS's tps-
debug.log or tps-error.log files, depending on the cause for the message.
Return Code
General Error Codes
6400
6700
6982
6985
Section 15.1.1, "Services That Are
Section 15.1.2, "Log Levels (Message
for more information.
Description
No specific diagnosis
Wrong length in Lc
Security status not satisfied
Conditions of use not satisfied
Smart Card Error Codes
Logged".
Categories)".
Table 15.2, "Log Levels and
383