Leviton decora DD00R-DLZ Installation Instructions Manual

Universal Matching Remotes (Dimming and Switching)
Cat. No. DD00R-DLZ - Matching Dimming Remote - 120/277VAC, 60Hz
Cat. No. DD0SR-DLZ - Matching Switching Remote - 120/277VAC, 60Hz
WARNINGS AND CAUTIONS:
• TO AVOID FIRE, SHOCK OR DEATH; TURN OFF POWER AT
pplications (Multi-location)
• To be installed and/or used in accordance with electrical codes a
g Dimming Remote - 120/277VAC, 60Hz
ital/Smart Switch with DD0SR-DLZ
• If you are unsure about any part of these instructions, consult an
WARNINGS AND CAUTIONS:
g Switching Remote - 120/277VAC, 60Hz
• TO AVOID FIRE, SHOCK OR DEATH; TURN OFF POWER AT CIRCUIT BREAKER OR FUSE AND TEST THAT POWER IS OFF BEFORE WIRING!
• To be installed and/or used in accordance with electrical codes and regulations.
Application:
• Decora
ON INSTRUCTIONS
ER IS OFF BEFORE WIRING!
• If you are unsure about any part of these instructions, consult an electrician.
• Decora Digital/Decora Smart remotes are not compatible with standard 3-way or 4-way switches. They must be used with compatible Decora Digital/
®
Decora Smart devices for multi-location switching.
Decora Smart devices for multi-location switching.
INTRODUCTION
th compatible Decora Digital/
WARNINGS AND CAUTIONS:
Decora Digital/Decora Smart Matching Dimmer or Switch Remote is designed to be used
• Use this device WITH COPPER OR COPPER CLAD WIRE ONLY.
for multi-location control of Leviton's line of Decora Digital and Decora Smart Dimmers or
INTRODUCTION
Switches allowing the lighting to be controlled from the main control or the remote location.
• Use only one (1) Decora Digital/Decora Smart dimmer or switch in a multi-location circuit with up to 4 matching remotes.
It works using digital circuitry that provides soft fade on/fade off, intuitive operation and a
NOTE: The remote(s) will turn the light on at the brightness level selected at the dimmer.
stylish form factor that is compatible with Leviton's Decora wallplates (sold separately).
ing application
White face assembled on device with ivory and light almond face plates included.
• Recommended minimum wall box depth for remotes is 2-1/2".
• Maximum wire length from switch to all installed remotes cannot exceed 300 ft (90 m).
FEATURES
3-Way or More Applications (Multi-location)
INSTALLATION INSTRUCTIONS
Digital/Decora Smart remotes are not compatible with s
®
PK-A3123-10-00-2B
WARNINGS AND CAUTIONS:
• Use this device WITH COPPER OR COPPER CL
• Use only one (1) Decora Digital/Decora Smart dim
NOTE: The remote(s) will turn the light on at the
Identifying your wiring application
Step 2
• Recommended minimum wall box depth for remo
(most common):
• Maximum wire length from switch to all installed r
NOTE: If the wiring in the wall box does not resemble
any of these configurations, consult an electrician.
3-Way Wiring - Digital/Smart Dimmer w
Step 4a
Remote Application:
1
3-Way or More Ap
Universal Matching Rem
Cat. No. DD00R-DLZ - Matching
Cat. No. DD0SR-DLZ - Matching
INSTALLATIO
1
2