Strings; Channels - AMX RMS 3.0 - PROGRAMMER GUIDE Manual

Resource management suite

Hide thumbs Also See for RMS 3.0 - PROGRAMMER GUIDE:

Table of Contents

NetLinx Modules

Strings

RMSBasicDeviceMod listens for the following strings from the vdvModule

device.

Strings and Descriptions

'POWER=[Power State]'

'MODEL=[Model]'

'MANUFACTURER=[Manufacturer]'

Any string received from the physical device, dvDevice, is an indication that the

device is communicating. As long as a string is received within the period set by

the communication timeout command, the module will notify RMS that the

device is communicating. See the communication timeout command for more

details.

The module watches for these channels on the vdvModule device.

9 - toggle System Power State

27 - Set system power to ON

28 - Set system power to OFF

254 - Power failure

255 - Power Status

Set the system power state. [PowerState]

should be 0 for off and 1 for on.

Example: 'POWER=1'

Set the model number.

Set the manufacturer name.

RMS NetLinx Programmer's Guide

Table of Contents

Do you have a question about the RMS 3.0 - PROGRAMMER GUIDE and is the answer not in the manual?