Supported File Types; Notes On Supported File Types; Supported Operating Systems And Minimum Pc Requirements - AMX FILETRANSFER2 V1.0 Instruction Manual

Supported File Types

The following are the types of files this application can send to and receive from, various NetLinx
and Axcess devices:

Notes on supported file types:

Supported Operating Systems and Minimum PC
Requirements
Supported operating systems:
You must have Administrator rights to install and run all required System files.
PC Requirements:
If the mouse wheel on your Microsoft® IntelliMouse® doesn't' work with NetLinx
Studio, try downloading the latest IntelliMouse drivers from Microsoft.
FileTransfer2
TOK Files
TKN Files (including compiled Duet TKN Files)
TP4 Files
TPD Files
KPD Files
IRL/IRV Files
SRC Files
The selection of available file types depends on the selected platform, Send/Receive
selection and communication settings
All files must mapped to devices before they can be selected for transfer.
Source Code files cannot be sent until they have been successfully compiled.
While Touch Panel UI files are sent to the panels themselves, KPD files are sent to the
master and not directly to the keypad. Before sending a KPD (KPDesign) file to the target
keypad(s), be sure that you have successfully compiled the Source Code file that contains
the keypad module, and sent it to the Master (see Configuring NetLinx Source Code for
KPD Files).
Windows XP®
Windows 2000®
Pentium 233 MHZ processor (minimum requirement); 300 MHZ or faster recommended.
Windows-compatible CD-ROM drive.
Windows-compatible mouse (or other pointing device).
Welcome To FileTransfer2
7