Cruisader Installation.qxd 5/24/05 9:00 PM Page 3 Tools Required Table of Contents Tools Required For Installation T T o o p p i i c c P P a a g g e e • Phillips or Blade Screwdriver Tools Required •...
Cruisader Installation.qxd 5/24/05 9:00 PM Page 7 Mounting Fasteners Mounting Fasteners Note: If mounting fasteners are missing from your package, please call 1-800-531-0004 for replacements.
Cruisader Installation.qxd 5/24/05 9:00 PM Page 9 Installation of Laser-Radar Antenna Installation of Laser-Radar Antenna General Information The reflector bracket serves two purposes; (1) to allow vertical The laser-radar antenna is water resistant and designed to be mounting of the antenna (see page 10 for vertical install mounted on a motorcycle, snowmobile, etc.
Page 6
Cruisader Installation.qxd 5/24/05 9:00 PM Page 11 Installation of Laser-Radar Antenna Installation of Laser-Radar Antenna Installing Using Dual Lock Fasteners The following pictures show many options for mounting and the hardware required for proper installation (5-9). The laser/radar antenna as well as the control panel can be installed using the dual lock fasteners.
Cruisader Installation.qxd 5/24/05 9:00 PM Page 13 Installation of Laser-Radar Antenna Installation of Laser-Radar Antenna Mount the antenna to the vehicle such that the ANTENNA Antenna Cable to the Control Panel window is facing the road surface, sky, right or left of the...
Cruisader Installation.qxd 5/24/05 9:00 PM Page 15 Installation of Control Panel Installation of Laser Module Antenna Installation of the Control Panel This laser module has two uses depending on installation of the laser-radar antenna. The first is providing front The installation package provides at least three ways to laser detection when the laser-radar antenna installation mount the control panel to the vehicle.
Cruisader Installation.qxd 5/24/05 9:00 PM Page 17 Installation of Laser Module Antenna Installation of Alarm LED The intense blue LED provides additional visual alerts to laser- If there is no fairing suitable to allow the proper orientation of the laser module, the module can be tie wrapped to the radar signals.
Cruisader Installation.qxd 5/24/05 9:00 PM Page 19 Installation of Console Installation of Console Power Cable Connection to the Battery (Cont.) 2. Auxiliary Port 3. Laser Port Locate the power and ground connection terminals on the power cable. Connect the positive lead (wire with fuse holder) to the positive terminal on the battery (on a conventional bat- 1.
9:00 PM Page 21 Optional Accessories Troubleshooting The following accessory can be ordered directly from Whistler by calling PROBLEM: No display or audio. • Check fuse in power cable, replace if necessary. 1-800-531-0004 or visiting our online store at www.whistlergroup.com •...
Need help?
Do you have a question about the CRUISADER and is the answer not in the manual?
Questions and answers