Download
Share
Print this page
  1. Manuals
  2. Brands
  3. EASTONTECH Manuals
  4. Cutter
  5. EW Series
  6. Operation manual

EASTONTECH EW Series Operation Manual

Full-automatic computer wire stripping machine
Hide thumbs Also See for EW Series:

Advertisement

Quick Links

Download this manual
EW-3045 OPERATION MANUAL
Edition No.: 2020 Rev 1
WENZHOU EAST WORLD IMPORT&EXPORT CO., LTD.
(CE, ISO9001)
EW Series Full-automatic Computer
Wire Stripping Machine
Operation Manual
(FOR EW-3045)
Website: www.ew-wirestripping.com
Email:kitty@ew-wirestripping.com
Tel/Fax:+86-0577-66603688

Advertisement

loading
Need help?

Need help?

Do you have a question about the EW Series and is the answer not in the manual?

Questions and answers

Related Manuals for EASTONTECH EW Series

Summary of Contents for EASTONTECH EW Series

  • Page 1 EW-3045 OPERATION MANUAL Edition No.: 2020 Rev 1 WENZHOU EAST WORLD IMPORT&EXPORT CO., LTD. (CE, ISO9001) EW Series Full-automatic Computer Wire Stripping Machine Operation Manual (FOR EW-3045) Website: www.ew-wirestripping.com Email:kitty@ew-wirestripping.com Tel/Fax:+86-0577-66603688...
  • Page 2 EW-3045 OPERATION MANUAL The first part: outline of mechanical appearance 1、Straightening frame: to level the wire rod. 2、Straightening frame lifting rod: lifting function when threading wire rod. 3、Wire splitting die: wire splitting function. 4、Wheel lifting switch: the front wheel is separated from the upper and lower parts, and the air pressure is required.
  • Page 3 EW-3045 OPERATION MANUAL downward, It is the best that the wire is pressed by the gap between two wheels to prevent the harness from slipping. 8 、 Tool carrier assembly cover: to protect foreign matters from entering the tool carrier assembly. 9 、...
  • Page 4 EW-3045 OPERATION MANUAL power is off, no matter whether the machine is working or stopped, you should not approach the blade by hand. The second part: introduction of computer operation Figure 1 1.1、Program: store parameters by 0-99 program serial numbers. 1.3、Wire in: thread the wire into the inlet hole until it reaches the feed roller.
  • Page 5 EW-3045 OPERATION MANUAL 1.10、Wire length: the total length of wire cut, in mm. 1.11、Thread end: the length required for the head end of wire rod. 1.12、 Stripping: the length of rubber stripping at the head end of wire rod. If the stripping parameter is less than the wire head parameter, it is called half stripping;...
  • Page 6 EW-3045 OPERATION MANUAL rubber is, the larger the retraction is; the thinner the rubber is, the smaller the retraction is, about 0.5mm ~ 5.0mm. 1.17 、 Set total amount: refers to the total output of the set work. The input data cannot be less than the input data of the quantitative.

  • Page 7: Manual Setting

    EW-3045 OPERATION MANUAL Manual setting Figure 2 2.1、Cutter: press the forward key to close the upper and lower knives. With the increase of the number in the square, press the back button to open the upper and lower knives, When the distance between the upper and lower blade edges is 0 points, confirm that the number in the square is the reference data, return to zero and return to the origin of tool setting induction.

  • Page 8: Parameter Setting

    EW-3045 OPERATION MANUAL the external cutter, inner cutter and catheter will reach the set value. 2.4、Inching: fine adjustment of stroke; when this function is turned on, press the forward and backward keys to make the cutter or catheter work 0.1 mm each time.
  • Page 9 EW-3045 OPERATION MANUAL greater the stripping force, and the faster the speed, the smaller the peeling force. 3.3、 Cutting deceleration: refers to the speed at which the upper and lower knife edge touches the wire until it is cut. The speed is 00-99, 00 is the fastest and 99 is the slowest.
  • Page 10 EW-3045 OPERATION MANUAL Figure 4 4.1、Set total length: enter the total length parameter set in [figure 1]. 4.2、Actual total length: input the actual total length data of processing. 4.3、Correction of total length: the parameters of total length can be automatically corrected by pressing the revised total length.
  • Page 11 EW-3045 OPERATION MANUAL line to cut out completely. 5.6、 Front opening spacing: avoid overlapping of upper and lower ends after opening the front end of flexible wire, which will affect peeling and cutting, and the front end wire head shall be reserved without opening 5.7、Back row spacing: avoid overlapping of upper and lower ends after opening the rear end of flexible wire, which will affect peeling and cutting, and the front end wire head shall be reserved...
  • Page 12 EW-3045 OPERATION MANUAL For example, 0.1 refers to 0.1 + [figure 1] line diameter. 6.2、Total length correction: the last end with a skin on the top, you can fine tune the total length correction to remove the skin. 6.3 、 Position 01: the length of the first skin cut from the wire rod to the middle; stripping: the first peeling distance in the middle.
  • Page 13 EW-3045 OPERATION MANUAL 1. Check the cutting depth of the wire tail. If it is too shallow, reduce the tail cannot wire diameter. peeled off 2. The upper and lower clearance of outlet roller is too large, and the adjustment becomes smaller. 3.
  • Page 14 EW-3045 OPERATION MANUAL slide with wax. Please clean 4 rollers with gasoline or banana water Roller. 1. Check whether the parameter line length has the data to be processed. The roller does not work 2. Check whether the synchronous belt is broken. 3.

This manual is also suitable for:

Ew-3045