Download
Share
Print this page
  1. Manuals
  2. Brands
  3. EASTONTECH Manuals
  4. Sewing Machine
  5. EW Series
  6. Operation manual

EASTONTECH EW Series Operation Manual

Full-automatic computer wire stripping machine
Hide thumbs Also See for EW Series:

Advertisement

Quick Links

Download this manual
EW-3035 OPERATION MANUAL
Edition No.: 2020 Rev 1
WENZHOU EAST WORLD IMPORT&EXPORT CO., LTD.
(CE, ISO9001)
EW Series Full-automatic Computer
Wire Stripping Machine
Operation Manual
(FOR EW-3035)
Website: www.ew-wirestripping.com
Email:kitty@ew-wirestripping.com
Tel/Fax:+86-0577-66603688
1

Advertisement

loading
Need help?

Need help?

Do you have a question about the EW Series and is the answer not in the manual?

Questions and answers

Related Manuals for EASTONTECH EW Series

Summary of Contents for EASTONTECH EW Series

  • Page 1 EW-3035 OPERATION MANUAL Edition No.: 2020 Rev 1 WENZHOU EAST WORLD IMPORT&EXPORT CO., LTD. (CE, ISO9001) EW Series Full-automatic Computer Wire Stripping Machine Operation Manual (FOR EW-3035) Website: www.ew-wirestripping.com Email:kitty@ew-wirestripping.com Tel/Fax:+86-0577-66603688...
  • Page 2 EW-3035 OPERATION MANUAL Part I: Outline of mechanical form 1. Straightener: Wire straightener. 2. Feed wheel pressure adjustment twist: Adjust feed wheel pressure between the two wheels, pull out twist clockwise rotation increase pressure, counter-clockwise rotation to reduce pressure, adjust to the appropriate pressure to push in for fixed. 3.
  • Page 3 EW-3035 OPERATION MANUAL 7. Up into the line wheel role: anti-clockwise rotation up into the line wheel, clockwise rotation will enter the line under the wheel. Feed wheel: The Motor drives the feed wheel to rotate so that the wire goes forward and backward, cooperating with the tool carrier to feed the wire and strip the head.
  • Page 4 EW-3035 OPERATION MANUAL clockwise rotation to reduce pressure, adjust to the appropriate pressure to push in for fixed. 17. Display screen: adjust the parameters of wire needed for processing. 18. Start: Press the start button to make the machine work when the data input is complete without error.
  • Page 5 EW-3035 OPERATION MANUAL Figure 1 1.1、Program: By 0-99 Item Program Series number storage parameters. 1.2、Line number: to be. 1.3、Incoming wire: thread the wire through the wire hole until the incoming wire roller, press the incoming wire roller to send the wire forward automatically. 1.4、Retreat line: Press the retreat line roller is back automatically retreat line.
  • Page 6 EW-3035 OPERATION MANUAL to stop the machine. 1.10、Line length: the total length of the cut wire, in MM. 1.11、End: The length of the end of the wire. 1.12、Stripping: The length of wire end rubber stripping, if the stripping parameters less than the parameters of wire end is called half stripping, if the stripping parameters greater than the parameters of wire end is called full stripping.

  • Page 7: Manual Setting

    EW-3035 OPERATION MANUAL 1.18、Count: The cumulative quantity produced. 1.19 、 Quantitative: Input Parameters how many times the machine operates automatically stop, such as input 100 machine operation to 100 will automatically stop, input 0 for no quantitative data, the machine will not automatically stop, to achieve the set amount of data will stop.

  • Page 8: Parameter Setting

    EW-3035 OPERATION MANUAL Figure 2 2.1、 Cutter: Press the forward key to close the upper and lower blades, press the back key to open the upper and lower blades as the number increases, the number in the square will decrease as the number in the square decreases, and when the distance between the upper and lower blades is 0 points, confirm that the number in the square is the datum, zero back, knife setting, induction, back to origin.
  • Page 9 EW-3035 OPERATION MANUAL Figure 3 3.1、Wire feeding speed: refers to motor-driven roller wire feeding speed 00-99,00 the slowest, 99 the fastest. 3.2、Cutting speed: refers to motor drive tool carrier cutting speed, speed 00-99,00 the slowest, 99 the fastest. 3.3、Stripping speed: refers to the speed of rubber peel, the slower the stripping force, the faster the stripping force smaller.
  • Page 10 EW-3035 OPERATION MANUAL 3.7、Tiller: not yet. 3.8、Disconnection detection： Off-line automatic shutdown. 3.9 、 Stripping scrap: if the thread skin falls off the blade, open function to cut off the thread skin to avoid overlapping secondary action to cut the wire. Line length correction Figure 4 4.1、Set the total length: enter the total length parameter set in figure 1.
  • Page 11 EW-3035 OPERATION MANUAL Intermediate Stripping Setting Figure 5 Middle Stripper switch: on / off 5.1、Wire diameter correction: when the middle stripping skin and copper wire are too tight to be peeled, the cutting depth of the middle stripping can be slightly increased, such as 0.1 refers to 0.1 [Figure 1] wire diameter.
  • Page 12 EW-3035 OPERATION MANUAL And so on... Part three: trouble shooting Questions Solution 1、 Check the head cutting depth, if too shallow, need to reduce thread won't the diameter of the line. come off 2、The upper and lower clearance of the feeding roller is too large and the adjustment is too small.
  • Page 13 EW-3035 OPERATION MANUAL connected together blade. without being cut 3、When the upper and lower blades are closed, there is a gap in the plane. It is necessary to reinstall the blades to make the upper and lower blades close. 1、There's stolen property on the wheel drive that needs cleaning The actual length does 2 、...

This manual is also suitable for:

Ew-3035