Insignia NS-A1113 User Manual page 19

NS-A1113 DVD Executive Shelf System
Video setup page
• Video output – This option is used to set the video output
mode: S-Video or Component.
Caution
Note
• Scan Mode – This option is used to select the scan mode:
P-SCAN, interlaced.
• Aspect ratio – 4:3PS, 4:3LB, 16:9
•
•
When the screen display is 4:3 and the display format of the DVD is
16:9, the image is compressed horizontally.
TV output – This system supports all common formats, including PAL,
AUTO, and NTSC.
Note
Make sure that you set your player to the correct video mode. The
default video mode is S-Video. If you connect your player to
component video without changing the video mode to Component,
your component video display will be poor quality.
If you select S-Video, scan mode is disabled.
No matter which format you select, if the screen is 4:3
display, the image is displayed in 4:3.
The DVD screen format is changeable.
• The adjustable range of sharpness is High, Middle and Low
(default is Low).
• The adjustable range of brightness is ±20 (default is 0).
• The adjustable range of contrast is ±16 (default is 0).
www.insignia-products.com
17