Insignia NS-A1113 User Manual page 15

NS-A1113 DVD Executive Shelf System
Number buttons
• While playing songs, press the number buttons to directly
select the songs you want to play.
• If the song you want to select is higher than Track 10, select it
by pressing the 10+ button once, then press the number
buttons (1--10). For example, to select Track 16, press 10+,
then press 6.
Clock function
This system has Clock Display, Time-Standby, and Time Turn-On
features.
Clock Display: When your system is in Standby mode, the display
shows the current time.
1 Press the Clock button on the remote control and select to t--:--
then enter the current time by pressing the number buttons.
For example, if the current time is 11:30, enter 1, 1, 3, 0 and the
system saves your setting.
Time-Standby: You can set the auto standby time of the system.
1 Press the Clock button on the remote control, selecting S - - -,
then inputting the desired Standby time. The longest
Time-Standby time that the system supports is 120 minutes.
For example, if you want to go into Standby mode after 30
minutes, enter 0, 3, 0. The system goes into Standby mode after
30 minutes.
Time Turn-On: You can set the auto Turn-on time of the system.
1 Press the Clock button on the remote control, select O--:--, then
enter the time you want.
For example, if the current time is 11:30, and you want the system
to turn on at 12:30, then enter 1, 2, 3, 0. The system will turn on
after one hour.
Note
Outer Audio input
After connecting external sound source components to your system,
you can press the Audio-in button to select either Audio 1 or Audio 2
to select those components as your audio source.
Reset
In any status, pressing this button returns the original setup (or
default) values.
Main channel tone adjustment
While listening to any audio source, adjust the bass or treble by
pressing the Bass +/- or Treble +/- buttons on the remote control.
Setting Time Turn-On makes the Clock display time relative to the
current time.
www.insignia-products.com
13