Related Manuals for AVM EVOLUTION R5
Summarization of Contents
Basic Information about the C5 / R5
Mechanical Construction
Details the case material, audio connectors, and gold plating for electrical integrity.
Power Supply
Explains the switch mode power supply and toroidal transformer for clean energy delivery.
Preamplifier Section
Covers fast input circuits, precise volume control, and optional sound processor capabilities.
Power Amplifier
Describes the dual output stages and power supplies for efficient, dynamic music reproduction.
CD Player / D/A-Converter
Details upsampling circuitry, quantization noise reduction, jitter reduction, filtering, and digital-to-analogue conversion.
Tuner (Not Installed in All Versions)
Covers FM/DAB reception, antenna sockets, stereo decoder, RDS, and station memory functions.
EVOLUTION C5/R5 Overview
Installation and Cooling
Details proper installation, airflow, and avoiding direct sunlight for heat management.
Connection to Mains
Instructions for connecting the power cord and checking mains voltage compatibility.
Connecting Analogue Signal Sources
Guides connecting external analogue sources to specific inputs for audio playback.
Connecting a Tape Recorder
Explains how to connect tape recorder inputs and outputs for recording or playback.
Connecting Processors / Equalizers
Details connecting external processors or equalizers to enhance audio signals.
Connecting Digital Equipment (C5 Only)
Guides connection of digital sources and recorders for the C5 model.
Connecting Loudspeakers
Instructions for connecting speakers, emphasizing correct polarity and cable diameter.
Connecting Headphones
Explains headphone connection to the front panel jack and automatic speaker muting.
Tuner Antenna
Instructions for connecting FM and DAB antennas to the unit.
Basic Operation
Switching On / Standby
Covers powering the unit on, standby mode, and safety precautions during storms.
Selecting the Signal Source
Explains how to choose the input source using the program selector and display.
Volume Setting / Mute
Details adjusting volume with the rotary encoder and using the dedicated mute function.
Setting of Input Sensitivity
Guides adjusting input sensitivity for different sources to prevent distortion and match levels.
Tuner (If Built In)
Covers basic tuner functions like tuning, station memory, and mode selection.
CD Player (C5 Only)
Explains CD player operations: open/close, basic playback controls, and playlist programming.
Menu System
Playmode
Allows selection between programmed playlist or standard CD playback.
Repeat
Sets repeat mode for a single title, all titles, or programmed sequence.
Random
Enables random playback of titles from the CD.
Tuner Mode DAB / FM
Selects the reception mode for DAB or FM broadcasts.
RDS-Display
Chooses display content for station name or RDS text information.
Scanmode
Sets automatic or manual tuning mode for the tuner.
Mode (FM Reception)
Allows setting FM tuner to mono or stereo for optimal sound quality.
DAB Antenna
Selects the antenna socket used for DAB reception.
FM Antenna
Selects the antenna socket used for FM reception.
Tone Control
Enables or bypasses tone controls (bass, treble) for linear sound reproduction.
Bass
Adjusts the bass level within a range of -12.5 to +12.5.
Treble
Adjusts the treble level within a range of -12.5 to +12.5.
SubBoost
Enhances low frequencies for small speakers and suppresses subsonic frequencies.
Loudness
Compensates for ear sensitivity at low volumes by adjusting bass and treble levels.
Balance
Sets the balance between left and right channels for optimal stereo imaging.
Name
Allows custom naming (up to 8 characters) of different audio sources.
Display
Adjusts the display brightness level between 1 and 8.
Processor
Switches the internal processor function on or off, affecting speaker outputs.
Monitor
Activates or deactivates the tape monitor function.
Troubleshooting and Maintenance
Cleaning
Instructions for cleaning the unit using a soft cloth and glass cleaner.
Amplifier Muted
Troubleshooting steps for muted amplifier, checking MUTE, MONITOR, PROCESSOR, and standby.
Amplifier Switches Off During Operation
Addresses overheating and overload issues, advising to switch off and cool down or check shorts.
Hum
Troubleshooting guide for hum issues, recommending proper grounding for record players.
Infrared Remote Control Not Working
Tips for remote control issues, including checking batteries and transmitter alignment.
Appendix
Expert Setup
Guides accessing and configuring advanced settings, then blocking them from the normal menu.
Reset
Explains how to reset all settings to their default values.
Need help?
Do you have a question about the EVOLUTION R5 and is the answer not in the manual?
Questions and answers