Installing An Aim - Cisco 1841 - 3G Bundle Router Hardware Installation Manual

Modules Internal to the Cisco 1841 Router
Figure 11-5
3
2
1
2
Insert the SODIMM into the SODIMM socket, as shown in
Step 3
Figure 11-6
2
1
2
Firmly press the SODIMM into the socket until the spring-loaded clips on the socket snap over the end
Step 4
of the SODIMM.

Installing an AIM

The Cisco 1841 router has the capability to support a single AIM module. To install an AIM, follow the
procedure given here.
Cisco 1800 Series Routers (Modular) Hardware Installation Guide
11-6
Chapter 11
Removing a SODIMM
Spring-loaded clips
SODIMM
Installing a SODIMM
SODIMM
Insert and rotate into socket.
Installing and Upgrading Internal Modules in Cisco 1800 Series Routers (Modular)
1
3 SODIMM socket
1
3
3 Spring-loaded clips
Figure 11-6.
OL-5876-03