Chapter 3 Preinstallation Requirements And Planning For Cisco 1800 Series Routers (Modular); Safety Recommendations - Cisco 1841 - 3G Bundle Router Hardware Installation Manual

Preinstallation Requirements and Planning for
Cisco 1800 Series Routers (Modular)
This chapter describes the site requirements and equipment needed to install your Cisco 1800 series
integrated services router (modular). It includes the following sections:
•
•
•
•
•
•
To see translations of the warnings that appear in this publication, see
Note
Information for Cisco 1840

Safety Recommendations

Follow these guidelines to ensure general safety:
•
•
•
•
•
•
Warning Read the installation instructions before connecting the system to the power source. Statement 1004
OL-5876-03
Safety Recommendations, page 3-1
General Site Requirements, page 3-3
Installation Checklist, page 3-4
Site Log, page 3-5
Inspecting the Router, page 3-6
Required Tools and Equipment for Installation and Maintenance, page 3-7
Routers.
Keep the chassis area clear and dust-free during and after installation.
If you remove the chassis cover, put it in a safe place.
Keep tools and chassis components away from walk areas.
Do not wear loose clothing that could get caught in the chassis. Fasten your tie or scarf, and roll up
your sleeves.
Wear safety glasses when working under conditions that might be hazardous to your eyes.
Do not perform any action that creates a hazard to people or makes the equipment unsafe.
C H A P T E R
Cisco 1800 Series Routers (Modular) Hardware Installation Guide
3
Regulatory Compliance and Safety
3-1