Cisco 1841 - 3G Bundle Router Hardware Installation Manual page 40

Interfaces on the Cisco 1861 Integrated Services Router
The Cisco 1861 Integrated Services Router comes with various possible configurations, based on built-in
ports and other hardware features of the Cisco 1861 Integrated Services Router and organized by model.
Table 4-1
interfaces, along with the values for these interfaces in the preconfigured router software configuration.
Note In Table
Table 4-1
Description
Console/Aux port
Fast Ethernet 10/100 expansion
port
Fast Ethernet 10/100 WAN port
Fast Ethernet 10/100 Power over
Ethernet (PoE) ports
FXS (Foreign Exchange Station)
ports
FXO (Foreign Exchange Office)
ports
ISDN BRI ports
VLAN number for data network
VLAN number for voice network —
Music-on-Hold (MoH) port
Compact Flash slot
(Factory Option) VIC: BRI*
(Factory Option) VIC: FXO*
(Factory Option) VIC: FXS*
* Only one optional VIC can be factory installed in a Cisco 1861 Integrated Services Router.
** The label on the front panel is build-specific. Functionality is unaffected.
Cisco 1800 Series Routers (Modular) Hardware Installation Guide
4-2
lists the labels and descriptions for the WAN, LAN, voice interface card (VIC), and other
4-1, all slots/ports are numbered right to left, unless otherwise noted.
Cisco 1861 Integrated Services Router: Interfaces
Chapter 4 Chassis Installation Procedures for Cisco 1800 Series Routers (Modular)
Label
CONSOLE
EXPANSION
WAN
Power over Ethernet, and
ACT 0 LNK to ACT 7 LNK
FXS, and
0-3
FXO, and
0-3
B0 - B1
—
COMPACT FLASH
VIC2-2BRI-NT/TE
and 0-1
VIC2-2FXO and 0-1
VIC2-4FXO and 0-3
VIC3-2FXS/DID and 0-1
VIC-4FXS/DID and 0-3
VIC3-4FXS/DID and 0-3
Value in Software Configuration
—
FastEthernet0/1/8
FastEthernet0/0
FastEthernet0/1/0 to 0/1/7
port 0/0/0 to 0/0/3
port 0/1/0 to 0/1/3
Top-to-bottom, port 0/1/0 to
0/1/1
Vlan1
Vlan100
voice-port 0/4/0
flash
port 0/2/0 to 0/2/1
port 0/2/0 to 0/2/1
or
port 0/2/0 to 0/2/3
port 0/2/0 to 0/2/1
or
port 0/2/0 to 0/2/3
OL-5876-03