Related Manuals for Seagate BarraCuda SATA ST16000DM001
Summary of Contents for Seagate BarraCuda SATA ST16000DM001
- Page 1 Seagate® BarraCuda® SATA Product Manual Standard Models ST24000DM001 ST20000DM001 ST16000DM001 210203200, Rev A March 2025...
-
Page 2: Revision History
Actual data rates may vary depending on operating environment and other factors. The export or re-export of hardware or software containing encryption may be regulated by the U.S. Department of Commerce, Bureau of Industry and Security (for more information, visit www.bis.doc.gov), and controlled for import and use outside of the U.S. Seagate reserves the right to change, without notice,... -
Page 3: Table Of Contents
4.3.3 SMART commands ......................27 Seagate BarraCuda SATA Product Manual, Rev A... -
Page 4: Seagate Technology Support Services
Seagate Technology Support Services Product support: www.seagate.com/support/products Compliance data: www.seagate.com/support Firmware and tools downloads: www.seagate.com/support/downloads Online support and services: www.seagate.com/contacts Warranty support: www.seagate.com/warranty Data recovery services: www.seagate.com/rescue Seagate OEM and distribution partners: www.seagate.com/partners Seagate BarraCuda SATA Product Manual, Rev A... -
Page 5: Introduction
SeaTools diagnostic software performs a drive self-test that eliminates unnecessary drive returns State-of-the-art cache and on-the-fly error-correction algorithms Support for SMART drive monitoring and reporting Supports latching SATA cables and connectors Worldwide Name (WWN) capability uniquely identifies the drive Seagate BarraCuda SATA Product Manual, Rev A... -
Page 6: Drive Specifications
2. Drive specifications Unless otherwise noted, all specifications are measured under ambient conditions, at 25°C, and nominal power. For convenience, the phrases the drive and this drive are used throughout this manual to indicate the Seagate BarraCuda SATA drive models. -
Page 7: Formatted Capacity
512 (see Section 2.2.1 LBA mode) ST20000DM001 20TB 39,063,650,304 ST16000DM001 16TB 31,251,759,104 * One GB equals one billion bytes when referring to hard drive capacity. Accessible capacity may vary depending on operating environment and Seagate BarraCuda SATA Product Manual, Rev A... -
Page 8: Lba Mode
Standby to Ready (typ/max) 30s / 60s Ready to Spindle Stop (typ/max) 20s / 20s NOTE Time-to-ready may be longer than normal if the drive power is removed without going through normal OS power-down procedures. Seagate BarraCuda SATA Product Manual, Rev A... -
Page 9: Power Specifications
10MHz. NOTE Equivalent resistance is calculated by dividing the nominal voltage by the typical RMS read/write current. 2.6.3 Voltage tolerance Voltage tolerance (including noise): ± 5% +12v ± 10% Seagate BarraCuda SATA Product Manual, Rev A... -
Page 10: Power-Management Modes
Active mode when disk access is necessary. Environmental specifications This section provides the temperature, humidity, shock, and vibration specifications for Seagate BarraCuda SATA drives. Ambient temperature is defined as the temperature of the environment immediately surrounding the drive. -
Page 11: Temperature
194 or Device Statistics log 04h page 5. Non-operating –40° to 158°F (–40° to 70°C) package ambient with a maximum gradient of 36°F (20°C) per hour. This specification assumes that the drive is packaged in the shipping container designed by Seagate for use with drive. 2.7.2 Humidity The values below assume that no condensation on the drive occurs. -
Page 12: Shock
The drive will exhibit greater than 90% throughput for sequential and random write operations while subjected to the shaped random power spectral density noise specified below. Table 14 - Random rotary operating vibration PSD OF 20-1500 Hz at 12.5 rad/sec^2 Frequency (Hz) 1500 (rad/sec^2)^2/Hz 5.53E-02 5.53E-02 3.49E-01 6.14E-04 Seagate BarraCuda SATA Product Manual, Rev A... -
Page 13: Acoustics
Seagate follows the ECMA-74 standards for measurement and identification of PDTs. An exception to this process is the use of the absolute threshold of hearing. Seagate uses this threshold curve (originated in ISO 389-7) to discern tone audibility and to compensate for the inaudible components of sound prior to computation of tone ratios according to Annex D of the ECMA-74 standards. -
Page 14: Warranty
2.10.2 Storage Maximum storage periods are 180 days within original unopened Seagate shipping package or 60 days unpackaged within the defined non-operating limits (refer to environmental section in this manual). Storage can be extended to one year packaged or unpackaged under optimal environmental conditions (25°C, <40% relative humidity non-condensing, and non-corrosive environment). -
Page 15: Safety Certification
The silver, copper, nickel, and gold films used in Seagate products are especially sensitive to the presence of sulfide, chloride, and nitrate contaminants. Sulfur is found to be the most damaging. In addition, electronic components should never be exposed to condensing water on the surface of the printed circuit board assembly (PCBA) or exposed to an ambient relative humidity greater than 95%. -
Page 16: Configuring And Mounting The Drive
For installations which require cables, users can connect the drive as illustrated in Figure 2, Attaching SATA cabling. Figure 2 Attaching SATA cabling Each cable is keyed to ensure correct orientation. Seagate BarraCuda SATA drives support latching SATA connectors. Seagate BarraCuda SATA Product Manual, Rev A... -
Page 17: Drive Mounting
MOUNTING HOLES BOTH SIDES. 3.750±.010 MAX TORQUE 6 IN/LBS 4.000±.010 .140±.015 1.028 MAX [26.11MM] 2.000 C L OF DRIVE NOTE The image is for mechanical dimension reference only and may not represent the actual drive. Seagate BarraCuda SATA Product Manual, Rev A... -
Page 18: Serial Ata (Sata) Interface
Hot-Plug compatibility Seagate BarraCuda SATA drives incorporate connectors which enable users to hot plug these drives in accordance with the Serial ATA Revision 3.2 specification. This specification can be downloaded from www.serialata.org. The drive motor must come to a complete stop (Ready to Spindle Stop time indicated in Section 2.5 Start/stop... -
Page 19: Supported Ata Commands
Command code (in hex) Accessible Max Address Configuration Get Native Max Address Ext / 0000 Set Accessible Max Address Ext / 0001 Freeze Accessible Max Address Ext / 0002 Check Power Mode Configure Stream Seagate BarraCuda SATA Product Manual, Rev A... - Page 20 Sanitize Device - Status Ext / 0000 Security Disable Password Security Erase Prepare Security Erase Unit Security Freeze Security Set Password Security Unlock Send FPDMA Queued Set Date & Time Ext Set Features Set Multiple Mode Seagate BarraCuda SATA Product Manual, Rev A...
- Page 21 Write DMA FUA Extended Write FPDMA Queued Write Log DMA Ext Write Log Extended Write Multiple Write Multiple Extended Write Multiple FUA Extended Write Sectors Write Sectors Extended Write Stream DMA Ext Write Uncorrectable Seagate BarraCuda SATA Product Manual, Rev A...
-
Page 22: Identify Device Command
13:1 Reserved for the Trusted Computing Group 0 Trusted Computing feature set is supported Standard Standby timer, IORDY supported and may be disabled 2F00 Capabilities 4000 PIO data-transfer cycle timing mode 0200 Retired (Obsolete) 0200 Seagate BarraCuda SATA Product Manual, Rev A... - Page 23 Command sets enabled B441 Command sets enable extension 6173 Ultra DMA support and current mode (see note following this table) xx7F Security erase time xxxx Enhanced security erase time xxxx Master password revision code FFFE Seagate BarraCuda SATA Product Manual, Rev A...
- Page 24 See the bit descriptions below for words 63, 84, and 88 of the Identify Drive data. Table 21 - Bit descriptions for words 63, 84, and 88 of the Identify Drive data Description (if bit is set to 1) Word 63 Seagate BarraCuda SATA Product Manual, Rev A...
- Page 25 Ultra DMA mode 2 is currently active. Ultra DMA mode 3 is currently active. Ultra DMA mode 4 is currently active. Ultra DMA mode 5 is currently active. Ultra DMA mode 6 is currently active. Seagate BarraCuda SATA Product Manual, Rev A...
-
Page 26: Set Features Command
Disable use of SATA features Enable read look-ahead (read cache) feature (default) Report full capacity available NOTE At power-on, or after a hardware or software reset, the default values of the features are as indicated above. Seagate BarraCuda SATA Product Manual, Rev A... -
Page 27: Smart Commands
SMART Enable Operations SMART Disable Operations SMART Return Status NOTE If an appropriate code is not written to the Features Register, the command is aborted and 0x04 (abort) is written to the Error register. Seagate BarraCuda SATA Product Manual, Rev A... - Page 28 AMERICAS Seagate Technology LLC, 47488 Kato Road, Fremont, California 94538, USA, www.seagate.com ASIA/PACIFIC Seagate Singapore International Headquarters Pte. Ltd. 90 Woodlands Avenue 7, Singapore 737911 EUROPE, MIDDLE EAST AND AFRICA Seagate Technology NL BV, Tupolevlaan, 105, 119 PA Schipol-Rijk. NL Publication Number: 210203200, Rev A March 2025...
Need help?
Do you have a question about the BarraCuda SATA ST16000DM001 and is the answer not in the manual?
Questions and answers