Hisense 55B4E31T Manual

IP Control Guide
Date Version No.
9 Sep, 2024 V1.0
th
6 Apr, 2025 V1.1
th
Introduction
This guide provides instructions for setting up and using IP control for Hisense digital signage
displays. IP control allows you to manage these displays over a local area network (LAN) using
TCP/IP network protocols. Commands to control the display are sent in different formats
depending on the product series.
Product Series Command Format
E series HEX
BM/GM series ASCII
DM/GM50D series HEX
Prerequisites
Stable local area network (LAN) with all devices connected.
•
A computer or control device with IP control software installed.
•
Basic networking knowledge.
•
Ensure all displays and control devices are on the same LAN.
•
Network Setup
Connect all displays and control devices to the same LAN.
•
Assign static IP addresses to displays for stable control access.
•
Check IP addresses via display settings or router interface.
•
Updates
Improved layout for clarity.
Corrected BM/GM series command format to ASCII.
•
Added command format summary table.
•
Clarified command examples for BM/GM series.
•
Improved layout for clarity.
•
Default Port
5000
8088
8000
1