Related Manuals for CLIVET MC3-Y 35M
Summarization of Contents
Specifications
1. Model Reference
Identifies specific indoor and outdoor unit model numbers for purchased equipment.
2. General Specifications
Provides detailed technical specifications for indoor and outdoor units, including fan, coil, and compressor details.
3. Dimensional Drawings
Illustrates the physical dimensions of the indoor unit, including body and panel measurements.
4. Electrical Wiring Diagrams
Explains abbreviations used in indoor unit electrical wiring diagrams for better understanding.
5. Refrigerant Cycle Diagrams
Details the refrigerant cycle with components like compressor, EEV, and sensors for different outdoor unit sizes.
7. Air Velocity and Temperature Distributions
Presents cooling and heating airflow and temperature distribution charts for specific indoor unit models.
8. Capacity Tables
Provides detailed cooling capacity tables for various indoor and outdoor unit combinations under different conditions.
9. Capacity Correction Factor for Height Difference
Offers correction factors for cooling and heating capacities based on pipe length and height difference.
10. Noise Criterion Curves
Displays octave band sound pressure level curves for indoor units across different frequencies.
11. Electrical Characteristics
Details electrical specifications for outdoor units, including phase, voltage, power wiring, and circuit breaker ratings.
Product Features
1. Operation Modes and Functions
Explains various operating modes like cooling, heating, and safety features such as auto-shutoff and compressor protection.
2. Remote Controller Functions
Describes the functions and buttons of the infrared wireless remote controller, including specifications.
Installation
Accessories
Lists and illustrates the various accessories included for indoor unit installation, refrigeration, and drainage.
1. Installation Overview
Provides a step-by-step visual guide for the overall installation order of the air conditioning unit.
2. Location Selection
Guides on selecting an appropriate location for the outdoor unit, considering obstructions and environmental factors.
3. Indoor Unit Installation
Details the service space and hanging procedure for installing the indoor unit in ceilings.
4. Outdoor Unit Installation
Covers service space requirements and the process of fixing the outdoor unit with anchor bolts.
5. Drainage Pipe Installation
Explains installation principles and key points for drainage pipe setup, including water flowrate and pipe selection.
6. Refrigerant Pipe Installation
Specifies maximum refrigerant pipe length and drop height requirements, and details oil trap installation.
7. Vacuum Drying and Leakage Checking
Outlines the purpose, selection, and procedures for vacuum drying and leakage testing of the system.
8. Additional Refrigerant Charge
Provides guidance on calculating and performing additional refrigerant charge based on pipe dimensions.
9. Engineering of Insulation
Discusses the operational procedure, purpose, and material selection for refrigerant pipe insulation.
10. Engineering of Electrical Wiring
Highlights key aspects of field wiring, grounding, and wire selection based on appliance current rating.
11. Panel Installation
Details the process of removing the front grille and installing the panel for the Box 2 950x950 indoor unit.
12. Test Operation
Describes the steps and points to confirm before and during the test operation of the installed air conditioner.
Need help?
Do you have a question about the MC3-Y 35M and is the answer not in the manual?
Questions and answers