Resetting Your Player; Specifications; System And Outputs - Insignia NS-D150A13 Important Information Manual

Resetting your player

Resetting your player returns all
settings to the factory default.
To reset your player:
1
Press SETUP. The on-screen menu
opens.
2
Press or to select Default
Setting, then press OK.
3
Press to highlight Defaults, press
to select Reset, then press OK.
Problem Possible solution
No power • Make sure that the
power cord is securely
connected to a power
outlet.
• Make sure that the
power outlet is
supplying power. Test
the power outlet by
plugging a device, such
as a lamp, into the
power outlet and
turning it on.
No picture • Make sure that the TV is
turned on and set to the
correct input for your
DVD player.
• Make sure that your
DVD player is correctly
connected to the TV.
No sound • Make sure that the TV or
home theater is turned
on.
• Make sure that the
sound on the TV or
home theater is not
muted.
• Make sure that the
volume on the TV or
home theater is turned
up.
• Make sure that your
DVD player is correctly
connected to the TV or
home theater.
4
Problem
Remote
control does
not work
Playback
does not
start, or starts
then stops,
when
pressing

Specifications

Specifications are subject to change
without notice.

System and outputs

TV signal
system
Frequency
response
S/N ratio
Audio
Audio
output
(analog)
www.insigniaproducts.com
Possible solution
The remote control comes
with the battery installed.
A plastic sheet covers the
battery to protect it. Make
sure that you remove the
plastic sheet. See "Using
the remote control for the
first time" in your online
User Guide.
• Make sure the is face up
in the disc tray.
• Make sure that the disc
is not dirty. See
"Cleaning CDs" in your
online User Guide.
(play)
Note: Additional troubleshooting
information is in your online User Guide.
Go to www.insigniaproducts.com, click
Support & Service, enter your model
number in the Product Search field, then
click Search.
NTSC
CD:
• 20Hz-20KHz (EIAJ)
DVD:
• 20Hz-22KHz (96KHz)
(Sample result)
• 20Hz-22KHz (48KHz)
(Sample result)
> 85 dB
MPEG LAYER2 standard
Electrical level output:
• 2.0 ± 0.2 V
Resistance:
• 10K Ω
NS-D150A13