Table of Contents
Advertisement
Quick Links
Advertisement
Table of Contents
Related Manuals for Siebert XC450 Series
Summarization of Contents
Safety Instructions
Important Information
General safety guidelines and user responsibilities for the unit's operation and maintenance.
Warning Notice
Information highlighting potential dangers, bodily harm, or property damage.
Intended Use
Specifies the authorized application of the unit within photovoltaic systems and compliance with regulations.
Special Safety Precautions for Installation
Specific safety measures required during the installation process to prevent hazards.
Qualified Staff
Defines the necessary expertise for personnel performing installation and maintenance to ensure safety.
Grounding
Details the requirement for a protective earth connection due to the unit's metal housing and safety class.
Mounting and Installation
Guidelines for secure and reliable mounting, emphasizing the use of appropriate fixing materials and local regulations.
Transport
Instructions for safe transportation, including temperature limits and permissible fluctuations.
Disposal
Information on environmentally safe recycling and disposal of the unit and its parts according to regulations.
Batteries and Rechargeable Batteries
Legal obligations for end-users regarding the return and disposal of batteries, prohibiting household waste.
Important Information
Copyright
States that the documentation is protected by copyright and reserves all rights for reproduction and processing.
Disclaimer
Acknowledges potential errors in documentation and welcomes suggestions for improvements.
Liability
Clarifies that product availability and technical specifications are subject to change and not legally guaranteed.
Cleaning
Instructions for cleaning the front panel using a scratch-free cloth, avoiding steam cleaners.
Accuracy of the Display
Explains that the display is an information output unit and the data source is responsible for the accuracy of displayed information.
Product Description
Brightness Control
Details manual and automatic adjustment of LED brightness based on ambient light conditions for optimal readability.
Installation
Requirements to the Installation Site
Specifies that the display is designed for wall mounting on a plane surface with sufficient capacity.
Installation Material
Lists the components included in the delivery for mounting the display unit.
Opening the Unit
Step-by-step instructions on how to safely open the display unit to access its internal components.
Mounting the Unit
Guidance on physically attaching the display unit to the wall using provided mounting holes and hardware.
Power Supply Connection
Instructions for connecting the unit to the power supply, including safety precautions and terminal connections.
Data Source Connection
Power Meter/Inverter/Data Logger with S0 Interface
Explains how to connect devices with an S0 interface, including cable types, polarity, and grounding.
Inverter/Data Logger with RS485 Interface
Details the connection procedure for devices using the RS485 interface, including wiring and termination resistors.
Connection of the Ethernet Cable
Instructions for connecting displays with an Ethernet interface, specifying cable types and network configuration.
Start-up and Configuration
Displays with USB Interface (XC4xx-xxx-x-04)
Describes the configuration process using the USB interface for specific display models.
Displays with Bluetooth Interface (XC4xx-xxx-x-04)
Outlines the procedure for configuring displays via Bluetooth, including pairing requirements.
Displays with Ethernet Interface (XC4-xx-xxx-x-05)
Explains the configuration process for displays using the Ethernet interface, referencing network settings.
Configuration of the Display
General overview of the configuration process using the Siebert SolarDisplayConfigurator software.
Start-up and Test
Recommends performing a functional test after configuration before permanently closing the device.
Controls
Mentions an LED indicator on the circuit board that signals the start-up status.
To Close the Display
Closing the Display for Indoor Use
Instructions for reassembling the display unit for indoor installations, focusing on connector insertion.
Closing the Display for Outdoor Use
Procedures for closing outdoor units, including securing connectors with screws to prevent unauthorized access.
SolarDisplayConfigurator
Installation
Steps and requirements for installing the SolarDisplayConfigurator software on a PC.
System Requirements
Minimum hardware and software specifications for the PC to run the SolarDisplayConfigurator.
Starting the Installation
Instructions on how to initiate the software installation process from the provided data carrier.
Deinstallation
Steps to uninstall the SolarDisplayConfigurator software via Windows settings.
Configuration of the Display
Detailed guide on configuring display settings using the Siebert SolarDisplayConfigurator software.
Connecting the Display
Explains how to connect the display to the PC via USB, Bluetooth, or Ethernet for configuration.
Control Concept
Describes the step-by-step process and navigation within the SolarDisplayConfigurator software.
Configuration Mode
Selection of different operating modes (Display, Slave Display, Gateway, Brightness, Expert) for configuration.
Daughter Displays
Information on configuring daughter displays and cascading them via RS485 interface.
Interface
Setting the communication interface (Ethernet, S0 Pulse, RS485) for connecting the display to the inverter/data logger.
Selection of Display or Gateway
Automatic recognition and selection of connected displays or gateways via USB, Bluetooth, or Ethernet.
Selection of the Display with USB or Bluetooth Connection
How to select a display connected via USB or Bluetooth using COM interfaces.
Selection of the Display or the Gateway with Ethernet Connection
Selecting a device connected via Ethernet, including IP address configuration and search functions.
Network Set-up
Configuring network parameters like IP address, subnet mask, and gateway for network connectivity.
S0 Parameter
Setting specific parameters for S0 interface connection, such as maximum power and pulse rates.
Select Inverter
Choosing the correct inverter or data logger and its protocol for serial or Ethernet communication.
Set the Inverter
Configuring network parameters for data loggers with network interfaces, including query intervals and sensors.
Server Settings of the Display
Configuring the display to act as a server for Ethernet data loggers, specifying the server port.
Define the Display
Customizing the display layout, assigning measured variables, digits, units, and decimal places.
General Settings
Setting general parameters like CO2 factor and display brightness control options.
Power Saving Mode
Enabling and configuring the energy-saving mode, including dark switching times for the display.
Brightness
Adjusting static brightness or activating automatic brightness control based on ambient light sensor.
Configuration File
Loading or creating configuration files for display parameterization.
Inverter Interface Gateway
Selecting the interface for connecting an inverter to the Siebert Ethernet Gateway.
Complete Configuration
Transferring the final configuration settings to the display device.
Bluetooth-Connection
Detailed steps for establishing a Bluetooth connection for configuration purposes.
Installation
Installing the Bluetooth USB adapter and ensuring proper Windows drivers are used.
Coupling via Windows 10
Pairing the display with a PC via Bluetooth using Windows 10 settings.
Testing the Coupling
Verifying the Bluetooth connection and identifying the virtual COM port for communication.
Bug Fixing
Troubleshooting common errors encountered during software installation, connection, and operation.
Network Resources
Lists required network ports and protocols for Ethernet interface configuration and operation.
Need help?
Do you have a question about the XC450 Series and is the answer not in the manual?
Questions and answers