Table of Contents
Related Manuals for bynav C1
Summarization of Contents
Default Configuration
Default Serial Port Configuration
Details default serial port configurations for COM and ICOM ports.
Default Output Messages and Frequency
Lists default output messages and their frequencies for base and rover stations.
Base Station Configuration
Base Station Pre-Configuration Checks
Prerequisites and checks before configuring base station settings.
Base Station Configuration Commands
Step-by-step commands for configuring the base station.
Set Base Station Coordinates
How to set the base station's known or unknown coordinates.
Rover Station Configuration
Rover Station Pre-Configuration Checks
Prerequisites and checks before configuring rover station settings.
Rover Station Configuration Steps
Step-by-step commands for configuring the rover station.
Rover Output Message Configuration
How to enable or disable specific output messages for the rover.
Rover Serial Port Settings
Settings for serial port format and baudrate on the rover.
Ethernet Configuration
Ethernet TCP Configuration
Steps to configure the receiver's static IP address for TCP.
Ethernet UDP Configuration
Steps to configure the receiver's static IP address for UDP.
Need help?
Do you have a question about the C1 and is the answer not in the manual?
Questions and answers