Related Manuals for Tektronix TPP0200
Summarization of Contents
Important safety information
General safety summary
General precautions for safe product operation and maintenance.
Probes and test leads
Safety guidelines for using probes and test leads.
Installation
Unpacking the Oscilloscope
Instructions for unpacking and checking contents.
Standard Accessories
Lists items included with the oscilloscope.
Operating requirements
Environment requirements
Specifies operating and non-operating environmental conditions.
Power requirements
Details power source voltage, frequency, and consumption.
Getting acquainted with the oscilloscope
Powering the oscilloscope
Steps to power the oscilloscope on and off.
Changing the user interface language
Guide to changing the display language.
Sampling oscilloscope concepts
Trigger concepts
Explains how triggers are used to stabilize waveforms.
Setting channel input parameters
Setting the oscilloscope bandwidth
How to adjust the oscilloscope's bandwidth.
Setting channel deskew
Compensating for signal delays between channels.
Trigger setup
Triggering on a waveform edge
How to trigger on signal edges.
Triggering on a specified pulse width
Triggering based on pulse width.
Acquisition setup
Using Autoset
How to use Autoset for quick waveform acquisition.
Setting the acquisition mode
How to select acquisition modes.
Analyzing a waveform
Taking automatic measurements
How to perform automatic waveform measurements.
Using cursors to take manual measurements
How to use cursors for manual measurements.
Saving data
Saving waveform data
How to save waveform data to memory or file.
Saving oscilloscope setup information
How to save instrument settings.
Recalling data
Recalling waveform data
How to load saved waveform data.
Erasing data from oscilloscope memory (TekSecure)
The TekSecure function
Explains the TekSecure function for erasing data.
Appendices
Installing new firmware on the oscilloscope
Steps to install new oscilloscope firmware.
Running diagnostic tests
Procedure to run instrument functional tests.
The Vertical controls
Controls for vertical settings and waveform display.
Need help?
Do you have a question about the TPP0200 and is the answer not in the manual?
Questions and answers