Table of Contents
Advertisement
Service Manual
TPS2000 Series
Digital Storage Oscilloscopes
071-1465-00
This document supports firmware version 10.00
and above.
Warning
The servicing instructions are for use by
qualified personnel only. To avoid personal
injury, do not perform any servicing unless you
are qualified to do so. Refer to all safety
summaries prior to performing service.
www.tektronix.com
Advertisement
Table of Contents
Troubleshooting
Related Manuals for Tektronix TPS 2012
Summarization of Contents
General Safety Summary
Personal Safety and Fire Prevention
Precautions to prevent fire and personal injury during use, including proper operation.
Environmental and Operational Safety
Guidelines for safe operation in various environments and proper ventilation.
Understanding Safety Symbols and Terms
Explains warnings, cautions, and common symbols used in the manual.
Specifications
Oscilloscope General Characteristics
Details acquisition, input, and general performance specifications.
Environmental Characteristics
Outlines operating and non-operating temperature, humidity, and altitude.
Probe Specifications
Lists electrical characteristics and certifications for the P2220 probe.
Operating Information
General Features Overview
Describes the basic capabilities and features of the TPS2000 Series oscilloscopes.
Functional Check Procedure
Steps to perform a quick functional check to verify oscilloscope operation.
Self Calibration and Default Setup
Guides on optimizing accuracy and restoring factory default settings.
Theory of Operation
Acquisition Board and System
Explains the acquisition board's components and the signal path.
Processing and Display Systems
Details the system responsible for data processing, display, and controls.
Power Supply and Front Panel
Covers power management, battery systems, and front panel components.
Performance Verification
Equipment Required for Testing
Lists necessary equipment for verifying oscilloscope performance specifications.
DC Gain Accuracy Test
Procedure to test the DC gain accuracy of all input channels.
Bandwidth and Trigger Sensitivity Tests
Verifies bandwidth, sample rate, delay time, and trigger sensitivity.
Adjustment Procedures
Required Equipment for Calibration
Lists the test equipment needed for oscilloscope calibration.
Factory Calibration Procedure
Step-by-step guide to load new calibration constants and perform factory calibration.
Maintenance
Preparation and ESD Prevention
Guidelines for preparing for maintenance and preventing electrostatic discharge damage.
Inspection, Cleaning, and General Care
Procedures for inspecting, cleaning, and maintaining the oscilloscope's exterior and interior.
Module Removal and Installation
Procedures for removing and installing major mechanical and electrical modules.
Troubleshooting and Error Logging
Information on isolating defective modules, using troubleshooting trees, and error codes.
Replaceable Parts
Parts Ordering and Module Servicing
Information on how to order parts and service options like module exchange.
Replaceable Accessories
Lists standard and optional accessories for the TPS2000 Series oscilloscopes.
Need help?
Do you have a question about the TPS 2012 and is the answer not in the manual?
Questions and answers