Table of Contents
Advertisement
Quick Links
End-Wheel, No-Till Drill
706/1006NT
Operator Manual
Read the Operator's Manual entirely. When you see this symbol,
the subsequent instructions and warnings are serious - follow
without exception. Your life and the lives of others depend on it!
Cover photo may show optional equipment not supplied
with
standard
For an Operator's Manual and Decal Kit in another
language, please see your Land Pride dealer.
313-855M
unit.
Printed 2024-06-12
Advertisement
Table of Contents
Related Manuals for Land Pride 1006NT
Summarization of Contents
Introduction
Description of Unit
Details the end wheel design and no-till capabilities.
Intended Usage
Explains the drill's use for no-till and conventional drilling.
Owner Assistance
Provides information on how to get customer service or repair parts.
Preparation and Setup
Pre-start Checklist
Lists essential checks before operating the drill.
Hitching Tractor to Drill
Instructions on safely connecting the drill to the tractor.
Bleeding Hydraulics
Procedure for removing air from hydraulic circuits for proper function.
Leveling Drill
Instructions for adjusting the drill to be level end-to-end.
Operating Instructions
Field Operation
Steps for performing fieldwork and seeding.
Transporting
Safety guidelines for transporting the drill.
Parking and Unhitching
Steps for safely parking and unhitching the drill.
Acremeter Operation
How to operate and read the electronic acremeter.
Adjustments
Coulter Adjustments
How to adjust coulters for cutting depth and soil penetration.
Coulter Down Pressure
Adding weights or adjusting springs for down pressure.
Opener Adjustments
Adjusting opener down pressure and seeding depth.
Spring Tine Harrow
Adjusting harrow tine angle and frame.
Troubleshooting
Uneven seed spacing or stand
Identifies causes and solutions for uneven seed spacing.
Uneven seed depth
Addresses causes and solutions for inconsistent seed depth.
Opener disks not turning freely
Solutions for openers not turning freely due to debris or adjustment.
Actual seeding rate different than desired
Troubleshooting incorrect seeding rates.
Coulters not going deep enough
Reasons and solutions for coulters not reaching desired depth.
Maintenance and Lubrication
Maintenance
General advice on proper servicing and inspection.
Storage
Guidelines for storing the drill to prolong its life.
Lubrication and Scheduled Maintenance
Specific lubrication points and maintenance intervals.
Coulter Hub Bearings
Lubrication schedule for coulter hub bearings.
Options
Seed Box Agitator
Describes the seed box agitator and its function.
Harrow Attachment
Details the coil-tine harrow and its purpose.
Fertilizer Attachment
Explains the fertilizer attachment for planting and fertilizing.
Small Seeds Attachment
Describes the attachment for metering various small seeds.
Appendix
Torque Values Chart
Table of recommended torque values for various bolts.
Specifications and Capacities
Key specifications and capacities of the drill models.
Hydraulic Schematic
Diagram illustrating the drill's hydraulic system.
Sprocket Configuration
Diagrams showing sprocket arrangements for different boxes.
Need help?
Do you have a question about the 1006NT and is the answer not in the manual?
Questions and answers