Technical Specifications - VINCENT SP-998 Instructions For Use Manual

Symptom
Poor sound quality
Humming low fre-
quency noise is audi-
ble, even as no audio
source is playing
back
Frequency response:
Nominal Output Power per channel at 8Ω:
Nominal Output Power per channel at 4Ω:
Input sensitivity:
Total Harmonic Distortion:
Signal to Noise Ratio:
Input Impedance:
AC power connection type:
Inputs:
Outputs:
Dimensions (W x H x D):
Weight:
Colour:
Vincent
34
SEARCH FOR ERRORS
Possible Cause
The cable connections are not tight, the con-
nectors are dirty or a cable is defective.
A record player has been connected to a line
level input of the preamplifier without using a
phono preamplifier.
An audio source with standard line level out-
put (example: CD player) is connected to the
power amplifier direct input "LINE IN" (3).
See section "Net frequency noise" in the
chapter "Tips".

TECHNICAL SPECIFICATIONS

Countermeasure
Check the cables and cable connections.
Interconnect a phono preamplifier.
Do not connect line level audio sources at the
inputs "LINE IN" (3).
See section "Net frequency noise" in the
chapter "Tips".
10 Hz - 20 kHz ±0.5 dB
300 W
600 W RMS
1.1 V
< 0.1 % (1 kHz, 1 W)
> 95 dB
47 kΩ
230 V / 50 Hz
1x RCA Main Input mono,
1x XLR Main Input mono,
1x POWER CONTROL (3.5 mm jack)
2 x 2 loudspeaker connectors,
1x POWER CONTROL (3.5 mm jack)
265 x 458 x 420 mm
30 kg
black / silver