Table of Contents
Advertisement
3.2 Advanced BIOS Features
In Advanced BIOS Features, you will be able to adjust many of the feature that effect system
speed and bootup options.
Virus Warning
Default: Disabled
CPU L1 & L2 Cache
Default: Auto
First to Other Boot Device
Swap Floppy Drive
Default: Disabled
Boot Up Floppy Seek
Default: Enabled
Boot Up NumLock Status
Default: On
Gate A20 Option
Default" Fast
Typematic Rate Setting
Default: Disabled
Typematic Rate
(chars/Sec)
Default: 6
Typematic Delay (MSec)
Default: 250
Security Option
Default: Setup
OS Select for DRAM >
64MB
Default: Non-OS2
Report No FDD for WIN95
Default: No
MONO
Enabled
Disabled
Enabled
Disabled
Floppy
LS-120
HDD-0
SCSI
CDROM
HDD-1
HDD-2
HDD-3
ZIP100
LAN
Disabled
Enabled
Disabled
Enabled
Disabled
On
Off
Fast
Normal
Enabled
Disabled
6, 8, 10, 12, 15, 20, 24, 30
250, 500, 750, 1000
Setup
System
Non-OS2
OS2
No
Yes
30
http://www.tyan.com
Toggles protection of the
boot sector on the hard
drive from being corrupted
by a virus.
Toggles usage of L1/L2
processor cache. Leave
Enabled for fast
performance.
Changes the system book
sequence and defines
which device will boot first.
Enables turns A: drive into
B: drive and vice versa.
Toggles seeking of floppy
drive during POST.
Toggles NumLock during
startup.
Leave as Fast.
Toggles control of
keyboard key repeat rate.
Defines how many
characters are repeated
per second.
Defines the delay that
occurs at key stroke
before that key will start to
repeat.
Sets the password on
either just the BIOS setup
or the entire system (BIOS
setup included).
Select OS2 only if you are
running OS/2 operating
system with more than
64MB of RAM.
Tells Win9x not to display
the floppy drive if there are
Advertisement
Table of Contents
